Summary for Test 2026-04-17-18-3
Test performed: CTM 389-19Project Information
| Project Identifiers | Project ID: 1000365 DEA: 033H9014 EFIS: 0323000075 |
|---|---|
| DIST-CO-RTE-PM | 03-SOL,YOL-50,80,113-Var |
| Award Date | 09/27/2024 |
| Closeout Date | Not set |
| Work Description | HMA, RHMA, SIGN STRUCTURE, CAMERA SYSTEMS, & FO CABLE SYSTEMS. |
| Location Description | SOLANO AND YOLO COUNTIES AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 09/17/2024) |
Sample Information
| Sample Taken Date | 04/17/2026 | Sample Unique Key | 18 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 04/21/2026 |
| Sample type | Production Start-Up | A brief description of the sample | 3/4" RWMA – G |
| The quantity of what the sample constitutes | 750 Tons | From where was the sample collected | Distributor |
| First name of sampler or witnessed by | Luis | Last name of sampler or witnessed by | Magana |
| Title of sampler | QA Tech | Telephone number of sampler | 2092250104 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | De Silva Gates - Marysville | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 1 | HMA Mix Number | MD6617 |
| Binder content (%) | 7.5 | Virgin binder PG | |
| Design binder PG | PG 64-16 | Binder Supplier | Valero |
| RAP content (%) | 0 | WMA Additives | Yes |
| Antistrip type | Evotherm M1 0.25% (BWB) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-04-17-18
DIME Test ID: 2026-04-17-18-3
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2026-04-28
Test Results
Specified number of passes at 12.7 mm: 25000
Specimen Preparation Method: PMLC
Input Type: Measured
Tester's full name: Joshua Wilson
Date of test: 04/28/2026
Test Temperature: 122 F
Compaction Method: SGC Cylindrical Specimen
Air Void Content for specimen A-1: 7.0 %
Air Void Content for specimen A-2: 6.9 %
Air Void Content for specimen B-1: 7.0 %
Air Void Content for specimen B-2: 7.0 %
Stripping Inflection Point (Wheel A): 25000
Stripping Inflection Point (Wheel B): 25000
Maximum impression at 5000 passes (left wheel): 1.44 mm
Maximum impression at 5000 passes (right wheel): 1.28 mm
Average impression at 5000 passes (left/right avg): 1.36 mm
Maximum impression at 10000 passes (left wheel): 1.97 mm
Maximum impression at 10000 passes (right wheel): 1.54 mm
Average impression at 10000 passes (left/right avg): 1.75 mm
Maximum impression at 15000 passes (left wheel): 2.42 mm
Maximum impression at 15000 passes (right wheel): 1.78 mm
Average impression at 15000 passes (left/right avg): 2.1 mm
Maximum impression at 20000 passes (left wheel): 2.84 mm
Maximum impression at 20000 passes (right wheel): 1.98 mm
Average impression at 20000 passes (left/right avg): 2.41 mm
Maximum impression at 25000 passes (left wheel): 3.19 mm
Maximum impression at 25000 passes (right wheel): 2.2 mm
Average impression at 25000 passes (left/right avg): 2.7 mm
Raw Data: excel
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/28/2026 ✔