Summary for Test 2026-03-26-52-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 1002109 DEA: 022J7404 EFIS: 0221000130 |
|---|---|
| DIST-CO-RTE-PM | 02-LAS-36-16.7/22.4 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Susan River Pavement - Roadway Rehabilitation (3R) |
| Location Description | In Lassen County about 8 miles west of Susanville from 0.7 mile west of Susan River Bridge to 0.4 mile east of Eagle Lake Road. |
| QA Service Level | 1 (Verified on 04/16/2026) |
Sample Information
| Sample Taken Date | 03/26/2026 | Sample Unique Key | 52 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/27/2026 |
| Sample type | Preliminary | A brief description of the sample | 2 Bags Sand Silt Rock and Soil |
| The quantity of what the sample constitutes | Structural Section Recommendation | From where was the sample collected | Source |
| First name of sampler or witnessed by | Colt | Last name of sampler or witnessed by | Sweeny |
| Title of sampler | MREA | Telephone number of sampler | |
| Laboratory sample identification | D80165 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | District 2 Lab | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Soil | The fabricator's/manufacturer's product name for the sample | |
|---|---|---|---|
| The fabricator/manufacturer designation for the sample | A detailed description of where the material sample was collected | Shoulder Slope near PM 17.0 | |
| Where the material sample would have been placed if not sampled |
Test Details
DIME Sample ID: 2026-03-26-52
DIME Test ID: 2026-03-26-52-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2026-04-23
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Josh Murphy
Date of test: 04/07/2026
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 14280 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 438.0 grams | 97 % | |||||
| 893.0 grams | 94 % | |||||
| 1012.0 grams | 93 % | |||||
| 1555.0 grams | 89 % | |||||
| 1999.0 grams | 86 % | |||||
| 3614.0 grams | 75 % | |||||
| 459.9 grams | ||||||
| 95.2 grams | 59 % | |||||
| 151.1 grams | 50 % | |||||
| 189.0 grams | 44 % | |||||
| 224.5 grams | 38 % | |||||
| 266.6 grams | 32 % | |||||
| 299.3 grams | 26.2 % | |||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/23/2026 ✔
