Summary for Test 2026-02-23-1-24
Test performed: ASTM A370-20Project Information
| Project Identifiers | Project ID: 1000611 DEA: 120R32U4 EFIS: 1222000054 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-55-0.2/R17.8 |
| Award Date | 02/07/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE, PLACE RHMA, REPLACE CB, SIGNS AND MODIFY LIGHTING SYSTEM. |
| Location Description | ORANGE COUNTY FROM 0.1 MILE SOUTH OF ROUTE 55/1 SEPARATION IN NEWPORT BEACH TO ROUTE 55/91 SEPARATION IN ANAHEIM |
| QA Service Level | 1 (Verified on 09/30/2024) |
Sample Information
| Sample Taken Date | 02/23/2026 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 03/02/2026 |
| Sample type | Per Request | A brief description of the sample | 3" Anchor Bolt Assembly |
| The quantity of what the sample constitutes | 276 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Alexis | Last name of sampler or witnessed by | Millan |
| Title of sampler | CT QA METS Inspector | Telephone number of sampler | 9097569960 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Halo Structural Products | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L191-024-26 | Structure unique identifier | |
| Structure name | Bid Item | 3919995 |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | NA |
|---|---|---|---|
| Heat Number(s) | bolt-79018795, plain nut-73126616, hdg nut-255947, washer-190155263 | Nut Mfg. Lot Number(s) | plain-BRAX hdg-BYAB |
| Washer Mfg. Lot Number(s) | 190155263 / 52257 | Bolt Specification | ASTM F1554 Gr 55 S-1 |
| Bolt Length(s) | 75.5 | Nut Specification | ASTM A563 |
| Washer Specification | ASTM F436 | Finish | HDG |
| Diameter/Size | 3" | Bolt Mfg. Lot Number | 7901879504 |
| Rocap Test Requirement(s) | NA | Lubricant Requirements(s) | NA |
| Washer Inner Diameter(s) | NA |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-02-23-1
DIME Test ID: 2026-02-23-1-24
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2026-04-18
Test Results
Number of Samples: 4
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 04/18/2026
UTM: NA
Temperature: 0 f
| Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | 79018795 | 0.506 | 0.201 | 55572 | 84987 | 27 | Kleinfelder |
| 2 | 1B | 79018795 | 0.502 | 0.198 | 55324 | 83972 | 27 | Kleinfelder |
| 3 | 1C | 79018795 | 0.504 | 0.200 | 56139 | 83257 | 27 | Kleinfelder |
| 4 | 1D | 79018795 | 0.505 | 0.200 | 55668 | 82728 | 27 | Kleinfelder |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/18/2026 ✔