DIME - Test Summary

Summary for Test 2025-12-02-64-1

Test performed: CTM 214-August 2010

Project Identifiers	Project ID: 993678 DEA: 042Q8004 EFIS: 0419000050 COOP: 042836,042944
DIST-CO-RTE-PM	04-SM-101,92-US 101 & SR 92-10.9/12.1 & 11.8/13.4
Award Date	01/22/2025
Closeout Date	Not set
Work Description	US 101/SR 92 INTERCHANGE AREA IMPROVEMENT :PROJECT WILL CONSTRUCT CONGESTION RELIEF IMPROVEMENTS AT THE US 101/SR 92 INTERCHANGE AREA.
Location Description	Not set
QA Service Level	1 (Verified on 09/15/2022)

Sample Taken Date	12/02/2025	Sample Unique Key	64
Will the laboratory/organization for which you are a member perform testing on this material sample?	No	Date that the sample was received by the laboratory/organization performing the testing	03/03/2026
Sample type	Annual Source Testing	A brief description of the sample	1" x #4
The quantity of what the sample constitutes	1 bag	From where was the sample collected	Source
First name of sampler or witnessed by	Robert	Last name of sampler or witnessed by	Lohman
Title of sampler	Consultant	Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Pleasanton	Transportation Laboratory (TL) Number	CPL120225
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-01-0010
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Stockpile @ Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2025-12-02-64

DIME Test ID: 2025-12-02-64-1

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate

Test Release Date: 2026-04-09

What size aggregate is being tested?: Coarse Aggregate

Input Type: Calculated

Tester's full name: David Padilla

Date of test: 03/16/2026

Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data

Percentage Loss of material retained on 1 ½ x 1 in. sieve: no data

Percentage Loss of material retained on 1 x ¾ in. sieve: 5.5 %

Percentage Loss of material retained on ¾ x ½ in. sieve: 3.9 %

Percentage Loss of material retained on ½ x ⅜ in. sieve: 4.7 %

Percentage Loss of material retained on ⅜ in. x #4 sieve: 3.9 %

Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data

Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data

Percentage Loss of material retained on 3/4 in. through #4 sieve: no data

Weighted Average Percent Loss of Coarse Aggregate: 4.2 %

Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data

Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 4/9/2026 ✔