Summary for Test 2026-02-23-18-2
Test performed: ASTM D412-16r21Project Information
| Project Identifiers | Project ID: 994574 DEA: 050C7334 EFIS: 0518000116 |
|---|---|
| DIST-CO-RTE-PM | 05-SCR-1-10.5/13.4 |
| Award Date | 06/29/2023 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT OVERCROSSING AND AUXILIARY LANE/ Replace Capitola Ave OC + RWs and SWs |
| Location Description | SANTA CRUZ COUNTY IN AND NEAR CITY OF CAPITOLA FROM STATE PARK DRIVE OVERCROSSING TO 0.2 MILE NORTH OF BAY AVENUE UNDERCROSSING |
| QA Service Level | 1 (Verified on 04/13/2023) |
Sample Information
| Sample Taken Date | 02/23/2026 | Sample Unique Key | 18 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/12/2026 |
| Sample type | Quality Assurance | A brief description of the sample | Plain Bearing Pad |
| The quantity of what the sample constitutes | 127 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Krishnamoorthy | Last name of sampler or witnessed by | Palaniappan |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Bridge Rubber Bearing | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 2527-2 |
|---|---|---|---|
| Material/Compound/Elastomer ID | NA | Samples Representing | 127 |
| Description (size) | 1" x 4" x 6" | Comments | |
| Description (Number of Shims) | 0 | Type of Bearing Pad | Plain |
| Description (Thickness of Shims) | NA | Manufacturer(s) | Bridge Rubber Bearing |
| Batch Number | 155075 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-02-23-18
DIME Test ID: 2026-02-23-18-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2026-04-07
Test Results
Number of specimens tested: 3
Unit of the Ultimate Tensile Values: psi
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 04/07/2026
UTM: NA
Humidity: 0 %
Temperature: 0 f
Sample 1 Median Thickness: 0.082 in
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2527 psi
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.074 in
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 2252 psi
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.073 in
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2513 psi
Sample 3 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2513 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/7/2026 ✔