Summary for Test 2026-03-26-23-1
Test performed: ASTM C39-21Project Information
| Project Identifiers | Project ID: 1001825 DEA: 040J5404 EFIS: 0414000011 |
|---|---|
| DIST-CO-RTE-PM | 04-CC-24-R5.8/R6.2 |
| Award Date | 10/30/2026 |
| Closeout Date | Not set |
| Work Description | Caldecott Tunnel Bores 1, 2, & 3 Rehab |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 11/18/2025) |
Sample Information
| Sample Taken Date | 03/26/2026 | Sample Unique Key | 23 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 03/26/2026 |
| Sample type | Informational | A brief description of the sample | Core samples from Bore 3, Niche 3 |
| The quantity of what the sample constitutes | Bore 3: Niche 3 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Dylan | Last name of sampler or witnessed by | LaRose |
| Title of sampler | Field Technician | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Caldecott Tunnels | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Caldecott Tunnels | Bid Item | Not set |
Material Information
| Material Type | Concrete Core | Detail description | 2 Cores taken form Bore 3 Niche 3 of the Caldecott Tunnels |
|---|---|---|---|
| Structure names | Calldecot Tunnels | Type of material | Concrete core |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-03-26-23
DIME Test ID: 2026-03-26-23-1
Testing Lab: Kleinfelder - Hayward
Test Method: ASTM C39-21: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2026-04-06
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Measured
Tester's full name: Aaron Kidd
Date of test: 04/01/2026
Capped in accordance with?: ASTM C617 - Sulfur Mortar Cap
Apparent mass of submerged cylinder 1: 9 lb
Average diameter of cylinder 1: 3.34 in
Average diameter of cylinder 2: 3.34 in
Maximum load on cylinder 1: 50875 lb
Maximum load on cylinder 2: 55875 lb
Type of fracture pattern of cylinder 1: 3
Type of fracture pattern of cylinder 2: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 0.98
Age of specimen: 7 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 8.76 in^2
Cross sectional area of cylinder 2: 8.76 in^2
Compressive strength of cylinder 1: 5810.0 psi
Compressive strength of cylinder 2: 6250.0 psi
Compressive strength (to nearest 10 psi): 6030 psi
Serial number of delivery ticket, if available: no data
General comments (publicly viewable) (Max 1000 characters): 2 day prep, 5 day cure = 7 day breaks
Test was verified on 4/6/2026 ✔