Summary for Test 2026-01-12-3-1
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 1001075 DEA: 040W0304 EFIS: 0420000164 |
|---|---|
| DIST-CO-RTE-PM | 04-CC-580-0.02/6.3 |
| Award Date | 10/16/2025 |
| Closeout Date | Not set |
| Work Description | Replace existing tolling structure with open road tolling (ORT) system at the Richmond-San Rafael. |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 03/13/2025) |
Sample Information
| Sample Taken Date | 01/12/2026 | Sample Unique Key | 3 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 03/26/2026 |
| Sample type | Quality Assurance | A brief description of the sample | 5'-2" dia. hoops |
| The quantity of what the sample constitutes | 1 Lot of 129 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Sherri | Last name of sampler or witnessed by | Brannon |
| Title of sampler | Aso Steel Inspector | Telephone number of sampler | 9168266371 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Conco Companies Benicia | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B22-003-26 | Structure unique identifier | |
| Structure name | Toll Plaza Reconfiguration | Bid Item | 3933531 |
Material Information
| Material Type | SMTL TM5 - Welded Hoops | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Ultimate | Rebar Heat Number(s) | 4151011 |
| Hoop Manufacturer Lot Number(s) | H02 | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Size | #6 |
| Diameter of Hoop | 5'-2" | Epoxy Coated | No |
| Epoxy Coating Color | NA | Rebar Manufacturer | CMC Steel AZ |
| Welding Company | Conco Companies Benicia | Coating Standards | Uncoated |
| Weld Type | Flash Welded |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-01-12-3
DIME Test ID: 2026-01-12-3-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)
Test Release Date: 2026-04-02
Test Results
Number of Samples: 4
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 04/02/2026
UTM: NA
Temperature: 0 f
| Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | 1 | 6 | 0.44 | 40760 | 92500 | ok necking | Kleinfelder |
| 2 | 2 | 1 | 6 | 0.44 | 40180 | 91500 | ok necking | Kleinfelder |
| 3 | 3 | 1 | 6 | 0.44 | 42150 | 96000 | ok necking | Kleinfelder |
| 4 | 4 | 1 | 6 | 0.44 | 31170 | 71000 | affected zone | Kleinfelder |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/2/2026 ✔