Summary for Test 2026-03-12-30-7
Test performed: CTM 375-February 2012Project Information
| Project Identifiers | Project ID: 995065 DEA: 112N1764 EFIS: 1123000022 |
|---|---|
| DIST-CO-RTE-PM | 11-IMP-8-R50.3/R96.7 |
| Award Date | 05/01/2025 |
| Closeout Date | 06/22/2026 |
| Work Description | MICROSURFACING, SHOULDER BACKING, PAVEMENT MARKING, & INSTALL SIGNS. |
| Location Description | IMPERIAL COUNTY AT VARIOUS LOCATIONS FROM 0.2 MILE WEST OF BONDS CORNER OVERCROSSING TO 0.2 MILE EAST OF FOURTH AVENUE OVERCROSSING . |
| QA Service Level | 1 (Verified on 06/11/2024) |
Sample Information
| Sample Taken Date | 03/12/2026 | Sample Unique Key | 30 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/13/2026 |
| Sample type | Verification | A brief description of the sample | JMFR |
| The quantity of what the sample constitutes | 12 boxes | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Gerardo | Last name of sampler or witnessed by | Cordero |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | API Gateway | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | 40 API Val | |
| Binder content (%) | 0.0 | Virgin binder PG | PG 70-10 |
| Design binder PG | PG 70-10 | Binder Supplier | Valero |
| RAP content (%) | 0 | WMA Additives | No |
| Antistrip type | Lime |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-03-12-30
DIME Test ID: 2026-03-12-30-7
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)
Test Release Date: 2026-04-03
Test Results
Number of Cores: 4
Input Type: Measured
Tester's full name: Mohammad Abbassi
Date of test: 04/02/2026
| 1 | 2 | 3 | 4 | |||
|---|---|---|---|---|---|---|
| 2.397 | ||||||
| 1 A 1 | 1 A 2 | 1 B 1 | 1 C 1 | |||
| 1181.3 grams | 1285.0 grams | 1091.7 grams | 1235.7 grams | |||
| 1211.5 grams | 1302.2 grams | 1115.3 grams | 1260.1 grams | |||
| 636.9 grams | 708.8 grams | 590.4 grams | 671.9 grams | |||
2.183 | 2.238 | 2.189 | 2.202 | |||
91.1 % | 93.4 % | 91.3 % | 91.9 % | |||
General comments (publicly viewable) (Max 1000 characters): Complies
Test was verified on 4/3/2026 ✔