Summary for Test 2025-10-27-63-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 1000567 DEA: 042K7404 EFIS: 0417000018 |
|---|---|
| DIST-CO-RTE-PM | 04-MRN-37-R11.2/14.5 |
| Award Date | 12/20/2024 |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC PVMT, PLACE RHMA AND REPLACE CONCRETE BARRIER. |
| Location Description | MARIN COUNTY IN AND NEAR NOVATO FROM IGNACIO OVERHEAD TO PETALUMA RIVER BRIDGE |
| QA Service Level | 1 (Verified on 10/16/2024) |
Sample Information
| Sample Taken Date | 10/27/2025 | Sample Unique Key | 63 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/03/2025 |
| Sample type | Quality Assurance | A brief description of the sample | 1/2" RHMA-G |
| The quantity of what the sample constitutes | 150 tons | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Jose | Last name of sampler or witnessed by | Ruiz |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Vulcan Lake Herman | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Plant |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Source | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | 1 | |
| Sublot number | 1 | Aggregate Mix Number |
Test Details
DIME Sample ID: 2025-10-27-63
DIME Test ID: 2025-10-27-63-1
Testing Lab: CT D04 - Richmond Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2026-04-06
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Jose Amparan Ruiz
Date of test: 11/03/2025
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 5858.0 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 224.0 grams | 96 % | |||||
| 966.0 grams | 84 % | |||||
| 3576.0 grams | 39 % | |||||
| 505.2 grams | ||||||
| 221.1 grams | 22 % | |||||
| 332.1 grams | 13 % | |||||
| 392.6 grams | 9 % | |||||
| 429.0 grams | 6 % | |||||
| 453.3 grams | 4 % | |||||
| 467.8 grams | 2.9 % | |||||
| 0.0 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/6/2026 ✔
