Summary for Test 2026-03-12-66-2

Test performed: AASHTO T27-14

Project Information

Project IdentifiersProject ID: 1000513
DEA: 020J8504
EFIS: 0219000168
DIST-CO-RTE-PM02-SIS-89-21/R34.622
Award Date08/05/2025
Closeout DateNot set
Work DescriptionMCCLOUD CAPM - PAVEMENT REHABILITATION
Location DescriptionIN SISKIYOU COUNTY AT AND NEAR MCCLOUD FROM 0.1 MILE SOUTH OF MUD CREEK BRIDGE TO ROUTE 5
QA Service Level1 (Verified on 08/12/2024)

Sample Information

Sample Taken Date03/12/2026 Sample Unique Key66
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/12/2026
Sample typeVerification A brief description of the sample2 bags of 3/8" Untreated Sized Virgin Aggregate
The quantity of what the sample constitutesJMF Verification and Annual Soundness Testing From where was the sample collectedSource
First name of sampler or witnessed byGiuliano Last name of sampler or witnessed byGiuntoli
Title of sampler Telephone number of sampler
Laboratory sample identificationD80156B Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis — Northstate Asphalt (Redding, CA) Transportation Laboratory (TL) Number877610B
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-45-0061::Latona Aggregates (Anderson, CA)
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedSized Untreated Aggregate Stockpile
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/8 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix Number

Test Details

DIME Sample ID: 2026-03-12-66
DIME Test ID: 2026-03-12-66-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2026-03-27

Test Results


What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Dacota Mei and Josh Murphy
Date of test: 03/18/2026
Cumulative Mass RetainedCumulative Percent Passing
1097.1 grams
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
785.7 grams28 %
1025.8 grams6 %
1044.5 grams5 %
1052.9 grams4 %
1057.8 grams4 %
1061.9 grams3 %
1066.3 grams2.8 %
1067.1 grams
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 3/27/2026