Summary for Test 2026-03-27-6-4
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 1001439 DEA: 061A7604 EFIS: 0621000015 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-46-51.4/R57.9 |
| Award Date | 10/20/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC PAVEMENT, RHMA OVERLAY, CONC. BARRIER AND RUMBLE STRIPS. |
| Location Description | KERN COUNTY IN AND NEAR WASCO FROM 0.20 MILE EAST OF ROUTE 43 TO 0.30 MILE EAST OF ROUTE 46/99 SEPARATION |
| QA Service Level | 1 (Verified on 08/15/2025) |
Sample Information
| Sample Taken Date | 03/27/2026 | Sample Unique Key | 6 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 03/27/2026 | Sample type | Acceptance |
| A brief description of the sample | 1x 4 Pcc Aggregate, Sand | The quantity of what the sample constitutes | 50 lbs aggregate for concrete |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Barrett |
| Last name of sampler or witnessed by | Felder | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Golden empire Wasco | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | 3945510 |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-15-0041 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Conveyor Belt | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
| The concrete mix design number | NCT09014 | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-03-27-6
DIME Test ID: 2026-03-27-6-4
Testing Lab: CT D06 - Bakersfield Field Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2026-03-27
Test Results
What size aggregate is being tested?: Fine Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Mike Cozad
Date of test: 03/27/2026
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 490.1 grams | ||||||
| 0.0 grams | 100 % | |||||
| 9.9 grams | 98 % | |||||
| 95.1 grams | 81 % | |||||
| 199.2 grams | 59 % | |||||
| 302.5 grams | 38 % | |||||
| 404.2 grams | 18 % | |||||
| 462.7 grams | 6 % | |||||
| 474.7 grams | 3 % | |||||
| 475.1 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 06-1A7604_37052_260327 | 255.50 KB | 03/27/2026 | 2026-03-27-6-4 | Info |
Test was verified on 3/27/2026 ✔