Summary for Test 2025-11-12-88-1
Test performed: CTM 231-March 2013Project Information
| Project Identifiers | Project ID: 1000665 DEA: 081K4004 EFIS: 0819000031 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-15-3.5/6.8 |
| Award Date | 01/29/2025 |
| Closeout Date | Not set |
| Work Description | HMA (TYPE A), RDWY EXC, STR CONC RET WALL, RUBBERIZED HMA (OGFC). |
| Location Description | TEMECULA FROM 0.1 MI NORTH OF TEMECULA PARKWAY TO 0.2 MI NORTH OF WINCHESTER ROAD |
| QA Service Level | 1 (Verified on 01/13/2025) |
Sample Information
| Sample Taken Date | 11/12/2025 | Sample Unique Key | 88 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/12/2025 |
| Sample type | Acceptance | A brief description of the sample | Class II Aggregate Base |
| The quantity of what the sample constitutes | kg | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Maqsud | Last name of sampler or witnessed by | Ahmed |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | CTM 231 TEST LOCATION | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Soil | The fabricator's/manufacturer's product name for the sample | |
|---|---|---|---|
| The fabricator/manufacturer designation for the sample | A detailed description of where the material sample was collected | I-15 NB, Mainline & Shoulder ~1' Below Grade, Sta 303+00 - 306+00 | |
| Where the material sample would have been placed if not sampled |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-11-12-88
DIME Test ID: 2025-11-12-88-1
Testing Lab: CT D08 - Fontana Field Testing Laboratory
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Test Release Date: 2026-03-25
Test Results
Method Type:: Standard Count
Number of Tests:: 3
Common Test Maximum Used:: Yes
Input Type: Measured
Tester's full name: Maqsud Ahmed
Date of test: 11/12/2025
Gage No.: 36636
Test No.: 2
Nuclear By: Maqsud Ahmed
Non-Bias Plan No.: 8
Depth: 5"
Material No.: no data
Material Type: Class II Aggregate Base
Impact By: Maqsud Ahmed
Standard Count Density: 1886 g/cc
Count or Density 1: 2316 g/cc
Count or Density 2: 2338 g/cc
Count or Density 3: 2471 g/cc
Standard Count Moisture: 644 g/cc
Moisture Count 1: 154 g/cc
Moisture Count 2: 131 g/cc
Moisture Count 3: 122 g/cc
Density: 2.04
Moisture: 0.18
Sum of Count or Density: 7125 g/cc
Average of Count or Density: 2375 g/cc
Sum of Moisture Count: 407 g/cc
Average of Moisture Count: 136 g/cc
Count Ratio Density: 1.26
Count Ratio Moisture: 0.21
Calculated Percent Relative Compaction: 98.4 %
Reported Percent Relative Compaction: 98 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/25/2026 ✔