DIME - Test Summary

Summary for Test 2026-03-12-31-8

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 995065 DEA: 112N1764
DIST-CO-RTE-PM	11-IMP-8-R50.3/R96.7
Award Date	05/01/2025
Closeout Date	Not set
Work Description	MICROSURFACING, SHOULDER BACKING, PAVEMENT MARKING, & INSTALL SIGNS.
Location Description	IMPERIAL COUNTY AT VARIOUS LOCATIONS FROM 0.2 MILE WEST OF BONDS CORNER OVERCROSSING TO 0.2 MILE EAST OF FOURTH AVENUE OVERCROSSING .
QA Service Level	1 (Verified on 06/11/2024)

Sample Taken Date	03/12/2026	Sample Unique Key	31
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/13/2026
Sample type	Verification	A brief description of the sample	JMFR
The quantity of what the sample constitutes	5 bags	From where was the sample collected	Supplier
First name of sampler or witnessed by	Gerardo	Last name of sampler or witnessed by	Cordero
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	API Gateway	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	See Mix
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	40 API Val

DIME Sample ID: 2026-03-12-31

DIME Test ID: 2026-03-12-31-8

Testing Lab: CT D11 - District 11 Materials Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2026-03-25

Input Type: Measured

Tester's full name: Shawn Rivers

Date of test: 03/19/2026

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 991.0 grams

Mass of the pycnometer with water (B): 680.9 grams

Mass of the oven dried sample (before pycnometer) (A): 494.5 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 494.5 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.604

Bulk specific gravity (SSD Basis): 2.633

Apparent specific gravity: 2.682

Absorption: 1.1 %

General comments (publicly viewable) (Max 1000 characters): N/A

Test was verified on 3/25/2026 ✔