Summary for Test 2026-01-21-55-1
Test performed: ASTM A416-18Project Information
| Project Identifiers | Project ID: 1001329 DEA: 100X7404 EFIS: 1013000008 |
|---|---|
| DIST-CO-RTE-PM | 10-CAL-12-17.1/17.5 |
| Award Date | 09/03/2025 |
| Closeout Date | Not set |
| Work Description | BRIDGE REPLACEMENT. |
| Location Description | CALAVERAS COUNTY NEAR SAN ANDREAS FROM 0.2 MILE WEST OF NORTH FORK CALAVERAS RIVER BRIDGE TO 0.2 MILE EAST OF NORTH CALAVERAS RIVER BRIDGE |
| QA Service Level | 1 (Verified on 06/16/2025) |
Sample Information
| Sample Taken Date | 01/21/2026 | Sample Unique Key | 55 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/03/2026 |
| Sample type | Quality Assurance | A brief description of the sample | 6/10" PT Strand |
| The quantity of what the sample constitutes | 14 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | NA | Last name of sampler or witnessed by | NA |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Sumiden Wire | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM4 - Prestressing Strand | Comments | |
|---|---|---|---|
| Reel/Coil/Pack Number(s) | S381088-1D, S381089-7, S381093-6, S381096-7, S381098-2 | Number of Coils | |
| Group Number | Strand Diameter | .6 in | |
| Grade | 270 | Strand Specification | ASTM A 416 |
| Heat Number(s) | S0520625, S0506025, S0553925, S0552925, S0553325-2 | Mfg. Lot Number(s) | NA |
| Manufacturer(s) | Sumiden |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-01-21-55
DIME Test ID: 2026-01-21-55-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A416-18: Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
Test Release Date: 2026-03-17
Test Results
Number of Samples: 5
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 03/11/2026
UTM: NA
Temperature: 0 f
Extensometers: NA
| Num | Heat Number | Coil | Area (sqin) | Peak Load (lbf) | Load at EUL (lbf) | Chord Modulus (Msi) | Elongation (in) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | S0520625 | S381088-1D | 0.217 | 59270 | 57300 | 29.6 | 0 | Atlas |
| 2 | S0506025 | S381089-7 | 0.217 | 60100 | 56880 | 29.5 | 0 | Atlas |
| 3 | S0553925 | S381093-6 | 0.217 | 60140 | 57400 | 28.8 | 0 | Atlas |
| 4 | S0552925 | S381096-7 | 0.217 | 61390 | 55850 | 28 | 0 | Atlas |
| 5 | S0553325-2 | S381098-2 | 0.217 | 61230 | 57000 | 28.8 | 0 | Atlas |
General comments (publicly viewable) (Max 1000 characters): Elongation Passed on All
Test was verified on 3/17/2026 ✔