Summary for Test 2026-03-09-16-1
Test performed: CTM 231-March 2013Project Information
| Project Identifiers | Project ID: 1000870 DEA: 07369704 EFIS: 0720000023 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-118-12/13.4 |
| Award Date | 04/25/2025 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT SOLDIER PILE WALLS, SLOPE PROTECTION, AND DRAINAGE SYSTEMS. |
| Location Description | VENTURA COUNTY IN SOMIS FROM SAND CANYON ROAD TO 0.1 MILE EAST OF BALCOM CANYON ROAD |
| QA Service Level | 1 (Verified on 03/12/2025) |
Sample Information
| Sample Taken Date | 03/09/2026 | Sample Unique Key | 16 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/09/2026 |
| Sample type | Acceptance | A brief description of the sample | Aggregate Base |
| The quantity of what the sample constitutes | 18000 SF | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Michelangelo | Last name of sampler or witnessed by | Sese |
| Title of sampler | TET | Telephone number of sampler | 310-345-6204 |
| Laboratory sample identification | 26-0868 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | NA | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Soil | The fabricator's/manufacturer's product name for the sample | |
|---|---|---|---|
| The fabricator/manufacturer designation for the sample | A detailed description of where the material sample was collected | Jobsite | |
| Where the material sample would have been placed if not sampled |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-03-09-16
DIME Test ID: 2026-03-09-16-1
Testing Lab: CT D07 - Materials Field Laboratory, Unit 1953
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Test Release Date: 2026-03-10
Test Results
Method Type:: Direct Read
Number of Tests:: 5
Common Test Maximum Used:: No
Input Type: Measured
Tester's full name: Michelangelo Sese
Date of test: 03/09/2026
Gage No.: 60203
Test No.: no data
Nuclear By: Michelangelo Sese
Non-Bias Plan No.: 1
Depth: 8
Material No.: no data
Material Type: Aggregate Base
Impact By: Michelangelo Sese
Standard Count Density: 2198 g/cc
Count or Density 1: 2.03 g/cc
Count or Density 2: 2.03 g/cc
Count or Density 3: 1.96 g/cc
Count or Density 4: 2 g/cc
Count or Density 5: 1.99 g/cc
Standard Count Moisture: 644 g/cc
Moisture Count 1: 0.15 g/cc
Moisture Count 2: 0.14 g/cc
Moisture Count 3: 0.14 g/cc
Moisture Count 4: 0.15 g/cc
Moisture Count 5: 0.15 g/cc
Sum of Count or Density: 10.01 g/cc
Average of Count or Density: 2 g/cc
Sum of Moisture Count: 0.73 g/cc
Average of Moisture Count: 0.15 g/cc
Calculated Percent Relative Compaction: 96.3 %
Reported Percent Relative Compaction: 96 %
General comments (publicly viewable) (Max 1000 characters): EB VEN Rte. 118
Sta. 712+00 to Sta. 724+00
Test was verified on 3/10/2026 ✔