DIME - Test Summary

Summary for Test 2026-02-04-26-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 994583 DEA: 07333604 EFIS: 0716000313
DIST-CO-RTE-PM	07-LA-2-2.3/14.2
Award Date	11/26/2024
Closeout Date	Not set
Work Description	COLD PLANE AC, PLACE HMA, REPLACE CURB RAMPS AND TRAFFIC SIGNALS.
Location Description	LOS ANGELES COUNTY IN LOS ANGELES AT VARIOUS LOCATIONS FROM CENTINELA AVENUE TO GLENDALE BOULEVARD UNDERCROSSING
QA Service Level	1 (Verified on 07/24/2023)

Sample Taken Date	02/04/2026	Sample Unique Key	26
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/09/2026
Sample type	Verification	A brief description of the sample	PSUE 3/4" WMA-A-SP R25 EVO 0.6%
The quantity of what the sample constitutes	2 bags comb agg, 2 bags comb RAP	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Victor	Last name of sampler or witnessed by	Pham
Title of sampler		Telephone number of sampler
Laboratory sample identification	0131A-26	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Adv Sealing Syst, Ingevity, Uni Rock Prod (Olive) BD - IRW	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0052
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Blue Diamond Irwindale Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	300154-R25 WMA	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2026-02-04-26

DIME Test ID: 2026-02-04-26-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2026-04-13

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 02/11/2026

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 958.4 grams

Mass of the pycnometer with water (B): 647.5 grams

Mass of the oven dried sample (before pycnometer) (A): 493.4 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 493.4 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.609

Bulk specific gravity (SSD Basis): 2.644

Apparent specific gravity: 2.704

Absorption: 1.3 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 4/13/2026 ✔