Summary for Test 2026-01-22-1-2
Test performed: ASME B1.2-83r17Project Information
| Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 01/22/2026 | Sample Unique Key | 1 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 02/04/2026 | Sample type | Quality Assurance |
| A brief description of the sample | Carriage Bolt | The quantity of what the sample constitutes | 1.000 |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | David |
| Last name of sampler or witnessed by | Lund | Title of sampler | CT METS QA INSPECTOR |
| Telephone number of sampler | 8014626352 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Universal Industrial Sales. Inc. | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | B390-007-26 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | na |
|---|---|---|---|
| Heat Number(s) | 20931810 | Nut Mfg. Lot Number(s) | na |
| Washer Mfg. Lot Number(s) | na | Bolt Specification | A325 |
| Bolt Length(s) | 3-1/2"" | Nut Specification | na |
| Washer Specification | na | Finish | HDG |
| Diameter/Size | 1/2" | Bolt Mfg. Lot Number | 64498 |
| Rocap Test Requirement(s) | na | Lubricant Requirements(s) | na |
| Washer Inner Diameter(s) | na |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-01-22-1
DIME Test ID: 2026-01-22-1-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Test Release Date: 2026-03-23
Test Results
Input Type: Calculated
Tester's full name: Andrew Auvinen
Date of test: 02/09/2026
Sample No.: 1B
Rocap Number: no data
Heat Number(s): no data
Mfg. Lot Number: 64498
Finish Coating: ASTM F2329 - Hot Dip
Product Markings: A325 SG
Size: 0.5 in
Bolt Length: 3.5 in
Pitch Diameter: 0.4570 in
Pitch Diameter 2nd: no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/23/2026 ✔