DIME - Test Summary

Summary for Test 2026-01-19-10-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 1000641 DEA: 080G8504 EFIS: 0815000218
DIST-CO-RTE-PM	08-RIV-10-R71.2/R72.6
Award Date	04/03/2025
Closeout Date	Not set
Work Description	BUILDING WORK.
Location Description	RIVERSIDE COUNTY NEAR INDIO FROM 0.9 MILE WEST TO 0.5 MILE EAST OF THE CACTUS CITY SAFETY ROADSIDE REST AREAS
QA Service Level	1 (Verified on 01/13/2025)

Sample Taken Date	01/19/2026	Sample Unique Key	10
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/02/2026
Sample type	Verification	A brief description of the sample	PSUE 3/4" WMA-A-SP R25 1.0% LSM 0.3% EVO
The quantity of what the sample constitutes	3 bags comb agg, 10 bags BIN agg, 5 bags Lime Treated agg, 1 bag coarse RAP	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Alberto	Last name of sampler or witnessed by	Pineda Gonzalez
Title of sampler		Telephone number of sampler
Laboratory sample identification	0108A-26	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Ingevity/ LHoist/ Valero/ West Coast Agg/ Granite	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0072
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Granite Desert Hot Spring
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	14747	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2026-01-19-10

DIME Test ID: 2026-01-19-10-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2026-04-03

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 02/04/2026

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 960.4 grams

Mass of the pycnometer with water (B): 649.1 grams

Mass of the oven dried sample (before pycnometer) (A): 495.2 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 495.2 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.624

Bulk specific gravity (SSD Basis): 2.650

Apparent specific gravity: 2.693

Absorption: 1.0 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 4/3/2026 ✔