Summary for Test 2026-01-20-4-14
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 1000785 DEA: 081J3204 EFIS: 0818000017 COOP: NONE |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-74-17.8 |
| Award Date | 05/29/2025 |
| Closeout Date | Not set |
| Work Description | BUILDING WORK, WROUGHT IRON FENCE, HOT MIX ASPHALT, & AGGREGATE BASE. |
| Location Description | RIVERSIDE COUNTY NEAR LAKE ELSINORE AT LAKE ELSINORE MAINTENANCE STATION AT 18745 CONARD AVENUE |
| QA Service Level | 1 (Verified on 01/13/2025) |
Sample Information
| Sample Taken Date | 01/20/2026 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/22/2026 |
| Sample type | Quality Assurance | A brief description of the sample | 5/8"x 16", ASTM F1554 Anchor Bolts |
| The quantity of what the sample constitutes | 85 anchor bolt assemblies, 2 samples | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Alexis | Last name of sampler or witnessed by | Millan |
| Title of sampler | CT METS QA INSPECTOR | Telephone number of sampler | 9097569960 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | AB Threading | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L191-008-26 | Structure unique identifier | |
| Structure name | Bid Item | 3912749 |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | Bolt 1000221652, Nut 1000130058, washer12511080 | Nut Mfg. Lot Number(s) | W000278671 |
| Washer Mfg. Lot Number(s) | 0725-729 | Bolt Specification | ASTM F1554 |
| Bolt Length(s) | 16" | Nut Specification | ASTM A563 |
| Washer Specification | ASTM F436 | Finish | ASTM 153 |
| Diameter/Size | 5/8" | Bolt Mfg. Lot Number | 4101021165240 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-01-20-4
DIME Test ID: 2026-01-20-4-14
Testing Lab: Kleinfelder - Rancho Cordova
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2026-02-05
Test Results
Number of Bolt Samples: 3
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 02/02/2026
UTM: NA
Temperature: 0 f
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | W000278671 | 0.625 | 33900 | 0 | 0 | Nuts | Kleinfelder |
| 2 | 1B | W000278671 | 0.625 | 33900 | 0 | 0 | Nuts | Kleinfelder |
| 3 | 1C | W000278671 | 0.625 | 33900 | 0 | 0 | Nuts | Kleinfelder |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/5/2026 ✔