Summary for Test 2025-12-18-33-2
Test performed: ASTM D412-16r21Project Information
| Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 12/18/2025 | Sample Unique Key | 33 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 12/22/2025 |
| Sample type | Quality Assurance | A brief description of the sample | 1/4" X 48" 55 DURO BEARING PAD |
| The quantity of what the sample constitutes | 1/4" X 48" 55 DURO BEARING PAD | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | NIKHIL | Last name of sampler or witnessed by | MOON |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Cal Neva Supply | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | LOT# 1390590 |
|---|---|---|---|
| Material/Compound/Elastomer ID | LOT 1390590 | Samples Representing | CALNEVA |
| Description (size) | 1 FT X 1 FT | Comments | |
| Description (Number of Shims) | NA | Type of Bearing Pad | Plain |
| Description (Thickness of Shims) | NA | Manufacturer(s) | CALNEVA |
| Batch Number | LOT 1390590 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-12-18-33
DIME Test ID: 2025-12-18-33-2
Testing Lab: Phoenix National Lab
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2026-01-27
Test Results
Number of specimens tested: 3
Unit of the Ultimate Tensile Values: psi
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 01/26/2026
UTM: NA
Humidity: 0 %
Temperature: 0 f
Sample 1 Median Thickness: 0.072 in
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2278 psi
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.071 in
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 2326 psi
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.074 in
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2331 psi
Sample 3 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2326 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/27/2026 ✔