Summary for Test 2025-12-09-55-1
Test performed: AASHTO T308-25Project Information
| Project Identifiers | Project ID: 994443 DEA: 053307C4 EFIS: 0514000028 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-41,46-44.5/45.3,54.0/57.8 |
| Award Date | 02/27/2023 |
| Closeout Date | Not set |
| Work Description | Wye Segment - Route 41/46 Separation |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 12/16/2022) |
Sample Information
| Sample Taken Date | 12/09/2025 | Sample Unique Key | 55 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 01/09/2026 | Sample type | Dispute Resolution |
| A brief description of the sample | Dispute Sample | The quantity of what the sample constitutes | 8 boxes |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Carlos |
| Last name of sampler or witnessed by | Manzo | Title of sampler | SPM QC |
| Telephone number of sampler | Laboratory sample identification | 25-03-20-69-A | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Papich Construction | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 4 |
| Sublot number | 30 | HMA Mix Number | 39AC34GGASA |
| Binder content (%) | 0.0 | Virgin binder PG | |
| Design binder PG | Binder Supplier | ||
| RAP content (%) | Not set | WMA Additives | |
| Antistrip type | - |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-12-09-55
DIME Test ID: 2025-12-09-55-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2026-02-05
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 01/16/2026
Test procedure used?: Method A
Mass of the specimen basket assembly: 3929.8 g
Mass of the specimen and specimen basket assembly prior to ignition: 6034.3 g
Mass of HMA Sample prior to ignition: 2104.5 g
Mass Loss: 183.0 g
Mass of aggregate remaining after ignition: 1921.5 g
Correction Factor (Percent by mass of HMA Specimen): 0.99 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.00 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 7.71 %
General comments (publicly viewable) (Max 1000 characters): Complies Target 7.50% Tested 7.71%
Test was verified on 2/5/2026 ✔