Summary for Test 2026-01-13-4-3
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 1000063 DEA: 061F8804 EFIS: 0623000106 |
|---|---|
| DIST-CO-RTE-PM | 06-KIN-41-R39.9/R48.3 |
| Award Date | 04/03/2024 |
| Closeout Date | 04/11/2025 |
| Work Description | COLD PLANE, HMA PAVING, AND INDIVIDUAL CONCRETE SLAB REPLACEMENT. |
| Location Description | KINGS COUNTY AT AND NEAR LEMOORE FROM ROUTE 41/198 SEPARATION TO FRESNO COUNTY LINE |
| QA Service Level | 1 (Verified on 01/29/2024) |
Sample Information
| Sample Taken Date | 01/13/2026 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/13/2026 |
| Sample type | Acceptance | A brief description of the sample | RSC concrete aggregates 1x4 & Sand |
| The quantity of what the sample constitutes | 2 bags 1x4, Sand | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Tomas | Last name of sampler or witnessed by | Silva |
| Title of sampler | MREA | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Vanguard Construction | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | 3903012 |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-10-0027 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Vanguard # 1785 | The fabricator/manufacturer designation for the sample | Rte 41 NB/ SB Lemoore |
| The plant number | 222 _8c97781 | A detailed description of where the material sample was collected | Stockpile @ Yard |
| Where the material sample would have been placed if not sampled | various locations | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | HE4X4BM | Lot number | |
| Sublot number | Aggregate Mix Number | HE4x4BM |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2026-01-13-4
DIME Test ID: 2026-01-13-4-3
Testing Lab: CT D06 - Materials Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2026-01-16
Test Results
What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Tomas Silva
Date of test: 01/15/2026
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 10006 grams | ||||||
| 0.0 grams | 100 % | |||||
| 99.0 grams | 99 % | |||||
| 1561.2 grams | 84 % | |||||
| 5613.0 grams | 44 % | |||||
| 7320.0 grams | 27 % | |||||
| 9347.0 grams | 7 % | |||||
| 9714.0 grams | 3 % | |||||
| 9920.0 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/16/2026 ✔