Summary for Test 2025-12-23-2-1
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 994326 DEA: 051C3604 EFIS: 0512000134 |
|---|---|
| DIST-CO-RTE-PM | 05-SB-217-0.9/1.4 |
| Award Date | 01/31/2023 |
| Closeout Date | Not set |
| Work Description | REPLACE BRIDGE. |
| Location Description | SANTA BARBARA COUNTY NEAR GOLETA FROM 0.2 MILE EAST OF GOLETA SLOUGH BRIDGE TO 0.4 MILE EAST OF SAN JOSE CREEK BRIDGE |
| QA Service Level | 1 (Verified on 10/17/2022) |
Sample Information
| Sample Taken Date | 12/23/2025 | Sample Unique Key | 2 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/31/2025 | Sample type | Quality Assurance |
| A brief description of the sample | HRC 500 510 Couplers | The quantity of what the sample constitutes | 1010 |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Adrian |
| Last name of sampler or witnessed by | Sanchez | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Integrity Rebar Placers | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Ultimate | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Manufacturer | Cascade Steel |
| Coupler Manufacturer | HRC | Intermediate Assembler or Fabricator | |
| Rebar Size | #9 | Coupler Model | HRC 500-510 |
| Coating Standards | Uncoated | Shape of Rebar | Straight |
| Rebar Hoop Diameter | Rebar Hoop Fabricator | ||
| Coupler Component Heat/Lot Number(s) | 500 Y5156 510 74141308 | Rebar Heat Number(s) | 323925 |
| Rebar Size 2 | Coupler Unique ID | TF-17-01 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-12-23-2
DIME Test ID: 2025-12-23-2-1
Testing Lab: Kleinfelder - Rancho Cordova
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile Slip)
Test Release Date: 2026-01-05
Test Results
Number of Samples: 4
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 01/05/2026
UTM: NA
Halo ID: NA
Temperature: 0 f
| Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Slip (inch) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | 323925 | 9 | 1 | 0.014 | 92530 | 92500 | NA | Kleinfelder |
| 2 | 2 | 323925 | 9 | 1 | 0 | 93280 | 93500 | NA | Kleinfelder |
| 3 | 3 | 323925 | 9 | 1 | 0 | 91620 | 91500 | NA | Kleinfelder |
| 4 | 4 | 323925 | 9 | 1 | 0 | 92960 | 93000 | NA | Kleinfelder |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/5/2026 ✔