Summary for Test 2025-12-08-37-9
Test performed: AASHTO T313-22Project Information
| Project Identifiers | Project ID: 1001575 DEA: 061H9604 EFIS: 0625000104 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-46,119-VAR |
| Award Date | 10/22/2025 |
| Closeout Date | 10/07/2026 |
| Work Description | COLD PLANE AC PAVEMENT AND PLACING RHMA TYPE G. |
| Location Description | KERN COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 09/15/2025) |
Sample Information
| Sample Taken Date | 12/08/2025 | Sample Unique Key | 37 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/15/2025 | Sample type | Quality Assurance |
| A brief description of the sample | 70-10 | The quantity of what the sample constitutes | 1 can of binder |
| From where was the sample collected | Source | First name of sampler or witnessed by | g |
| Last name of sampler or witnessed by | n/a | Title of sampler | operator |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Griffith Edmonston | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | 753964 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 70-10 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | San Joaquin Refinery - Bakersfield CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | ||
| HMA Type | Not set | HMA Supplier Mix ID Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-12-08-37
DIME Test ID: 2025-12-08-37-9
Testing Lab: WSP USA - Phoenix
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2025-12-30
Test Results
Input Type: Calculated
Tester's full name: Erik Svensson
Date of test: 12/30/2025
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: no data
Estimated Stiffness Modulus 60.0 s: 266.500 MPa
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.372
General comments (publicly viewable) (Max 1000 characters): BBR
Test was verified on 12/30/2025 ✔