Summary for Test 2025-12-08-37-2
Test performed: AASHTO T315-24Project Information
| Project Identifiers | Project ID: 1001575 DEA: 061H9604 EFIS: 0625000104 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-46,119-VAR |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC PAVEMENT AND PLACING RHMA TYPE G. |
| Location Description | KERN COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 09/15/2025) |
Sample Information
| Sample Taken Date | 12/08/2025 | Sample Unique Key | 37 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/15/2025 |
| Sample type | Quality Assurance | A brief description of the sample | 70-10 |
| The quantity of what the sample constitutes | 1 can of binder | From where was the sample collected | Source |
| First name of sampler or witnessed by | g | Last name of sampler or witnessed by | n/a |
| Title of sampler | operator | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Griffith Edmonston | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | 753964 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 70-10 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | San Joaquin Refinery - Bakersfield CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-12-08-37
DIME Test ID: 2025-12-08-37-2
Testing Lab: Atlas - Denver
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2025-12-30
Test Results
Phase: RTFO residue
Input Type: Measured
Tester's full name: Erik Svensson
Date of test: 12/30/2025
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.267 kPa
Phase Angle (δ) (for the 10 cycles): 88.7 degree
Complex Modulus (G*) (for the 10 measurements): 2.669 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 2.67 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO
Test was verified on 12/30/2025 ✔