Summary for Test 2025-12-08-2-1
Test performed: ASME B1.2-83r17Project Information
| Project Identifiers | Project ID: 1000207 DEA: 060Q4324 EFIS: 0619000026 COOP: 061730 |
|---|---|
| DIST-CO-RTE-PM | 06-TUL-190-13.1/16.6 |
| Award Date | 06/27/2025 |
| Closeout Date | Not set |
| Work Description | HMA, MINOR CONCRETE AND JPCP. |
| Location Description | TULARE COUNTY IN AND NEAR PORTERVILLE AT VARIOUS LOCATIONS FROM 0.2 MILE WEST OF WESTWOOD STREET TO 0.1 MILE EAST OF SOUTH MAIN STREET |
| QA Service Level | 1 (Verified on 03/25/2024) |
Sample Information
| Sample Taken Date | 12/08/2025 | Sample Unique Key | 2 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/15/2025 | Sample type | Quality Assurance |
| A brief description of the sample | 2-1/2” X 60” ROD F1554 GR.55 (18”GALV) 12”TOP 6”BOT | The quantity of what the sample constitutes | 1 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Daniel |
| Last name of sampler or witnessed by | Garcia Arreola | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Madden Bolt Corporation | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | N/A |
|---|---|---|---|
| Heat Number(s) | Bolt 58065517 Nut 20984060 Washer 247697 Nut 20954770 | Nut Mfg. Lot Number(s) | BWAH, BZCX |
| Washer Mfg. Lot Number(s) | 0425-616 | Bolt Specification | 2-1/2" X 60" ROD F1554 GR. 55 |
| Bolt Length(s) | 60" | Nut Specification | 2-1/2" ASTM A563 DH Hex Nut, Hot-Dip Galvanized Plain |
| Washer Specification | 2-1/2" ASTM F436 Flat Washer, Hot-Dip Galvanized | Finish | HDG and plain |
| Diameter/Size | 2-1/2" | Bolt Mfg. Lot Number | N/a |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-12-08-2
DIME Test ID: 2025-12-08-2-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Test Release Date: 2026-01-06
Test Results
Input Type: Calculated
Tester's full name: Kevin De Souza
Date of test: 12/16/2025
Sample No.: 1A
Rocap Number: no data
Heat Number(s): 58065517
Mfg. Lot Number: no data
Finish Coating: ASTM A153 - Hot Dip
Product Markings: YELLOW
Size: 2.5 in
Bolt Length: 60 in
Pitch Diameter: 2.349 in
Pitch Diameter 2nd: 2.349 in
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/6/2026 ✔