Summary for Test 2025-09-27-15-1
Test performed: AASHTO T209-25Project Information
| Project Identifiers | Project ID: 1001223 DEA: 070W2104 EFIS: 0721000087 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-2-R18.7 |
| Award Date | 06/23/2025 |
| Closeout Date | 05/29/2026 |
| Work Description | PLACE CLASS 3 AGGREGATE BASE AND HOT MIX ASPHALT. |
| Location Description | LOS ANGELES COUNTY IN LOS ANGELES AT LOS ANGELES REGIONAL TRANSPORTATION MANAGEMENT CENTER AT 2901 AT WEST BROADWAY |
| QA Service Level | 1 (Verified on 07/02/2025) |
Sample Information
| Sample Taken Date | 09/27/2025 | Sample Unique Key | 15 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/30/2025 | Sample type | Acceptance |
| A brief description of the sample | 1/2 HMA-A | The quantity of what the sample constitutes | 750 Tons |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Christian |
| Last name of sampler or witnessed by | Gonzalez | Title of sampler | Vulcan QC |
| Telephone number of sampler | Laboratory sample identification | 25-1055 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vulcan Materials Sun Valley | |
| Transportation Laboratory (TL) Number | 004459 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | 320200W SVA VLO | |
| Binder content (%) | 0.0 | Virgin binder PG | |
| Design binder PG | Binder Supplier | ||
| RAP content (%) | Not set | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-09-27-15
DIME Test ID: 2025-09-27-15-1
Testing Lab: CT D07 - Materials Field Laboratory, Unit 1953
Test Method: AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2025-12-15
Test Results
Number of Samples: 1
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Philip Maquiran
Date of test: 10/02/2025
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water 1: 7349.5 grams
Mass of oven-dry sample in air for Sample 1: 1573.0 grams
Mass of container filled with the sample and water for Sample 1: 8295.2 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.508
Theoretical maximum density at 25°C (77°F): 156.1 lb/ft^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/15/2025 ✔