Summary for Test 2025-12-08-16-1
Test performed: AASHTO T209-25Project Information
| Project Identifiers | Project ID: 1001575 DEA: 061H9604 EFIS: 0625000104 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-46,119-VAR |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC PAVEMENT AND PLACING RHMA TYPE G. |
| Location Description | KERN COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 09/15/2025) |
Sample Information
| Sample Taken Date | 12/08/2025 | Sample Unique Key | 16 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/08/2025 |
| Sample type | Acceptance | A brief description of the sample | 3/4" HMA- Type A |
| The quantity of what the sample constitutes | L1SL1- 30 box HMA, 4 bags of cold feed, 4 bags of virgin aggregate and 4 canes of PG70-10 | From where was the sample collected | Source |
| First name of sampler or witnessed by | Barrett | Last name of sampler or witnessed by | Felder |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Griffith Edmonston | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | 3933861 |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 1 | HMA Mix Number | |
| Binder content (%) | 4.7 | Virgin binder PG | PG 70-10 |
| Design binder PG | PG 64-16 | Binder Supplier | San Juaquin Refinery |
| RAP content (%) | 15 | WMA Additives | Yes |
| Antistrip type | LIme 0.8% |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-12-08-16
DIME Test ID: 2025-12-08-16-1
Testing Lab: CT D06 - Bakersfield Field Laboratory
Test Method: AASHTO T209-25: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2025-12-09
Test Results
Number of Samples: 1
What is the unit of measurement for theoretical density?: SI Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Mike Cozad
Date of test: 12/08/2025
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water 1: 7328.1 grams
Mass of oven-dry sample in air for Sample 1: 2589.5 grams
Mass of container filled with the sample and water for Sample 1: 8898.3 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.540
Theoretical maximum density at 25°C (77°F): 2533 kg/m^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/9/2025 ✔