Summary for Test 2025-12-01-17-1
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 1000973 DEA: 101T5604 EFIS: 1025000023 |
|---|---|
| DIST-CO-RTE-PM | 10-SJ-99- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Bridge Girder Repair |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 02/13/2025) |
Sample Information
| Sample Taken Date | 12/01/2025 | Sample Unique Key | 17 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 12/02/2025 |
| Sample type | Quality Assurance | A brief description of the sample | Bar-Lock L Series D250L |
| The quantity of what the sample constitutes | 4 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | NA | Last name of sampler or witnessed by | NA |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Job Site | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Service | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Manufacturer | CMC |
| Coupler Manufacturer | Dayton Superior | Intermediate Assembler or Fabricator | |
| Rebar Size | #11 | Coupler Model | Bar-Lock L Series D250L |
| Coating Standards | Uncoated | Shape of Rebar | Straight |
| Rebar Hoop Diameter | Rebar Hoop Fabricator | ||
| Coupler Component Heat/Lot Number(s) | 218130 | Rebar Heat Number(s) | 9009075 |
| Rebar Size 2 | Coupler Unique ID | SL-17-06 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-12-01-17
DIME Test ID: 2025-12-01-17-1
Testing Lab: Atlas - Oakland
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile Slip)
Test Release Date: 2025-12-09
Test Results
Number of Samples: 4
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 12/08/2025
UTM: NA
Halo ID: na
Temperature: 72 f
| Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Slip (inch) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1A | 9009075 | 11 | 1.56 | 0.0060 | 143660 | 92090 | NA | Atlas |
| 2 | 1B | 9009075 | 11 | 1.56 | 0 | 139180 | 89218 | NA | Atlas |
| 3 | 1C | 9009075 | 11 | 1.56 | 0 | 140850 | 90288 | NA | Atlas |
| 4 | 1D | 9009075 | 11 | 1.56 | 0 | 141000 | 90385 | NA | Atlas |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/9/2025 ✔