Summary for Test 2025-12-03-22-5
Test performed: CTM 217-June 2011Project Information
| Project Identifiers | Project ID: 214649 DEA: 07316004 EFIS: 0715000194 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-14-60.70 |
| Award Date | 02/07/2023 |
| Closeout Date | Not set |
| Work Description | REHABILITATION FOR THE ON/OFF RAMPS AND ADJACENT SHOULDERS. UPGRADING METAL BEAM GUARDRAILS, AC DIKES, SIGN PANELS, CURB RAMPS, TRAFFIC LOOPS DETECTORS, AND SOME OTHER HIGHWAY APPURTENANCES. |
| Location Description | ROUTE 14 FROM PALMDALE BLVD TO KERN COUNTRY LINE. |
| QA Service Level | 1 (Verified on 01/29/2020) |
Sample Information
| Sample Taken Date | 12/03/2025 | Sample Unique Key | 22 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/04/2025 |
| Sample type | Quality Assurance | A brief description of the sample | 1x4 PCC Aggregates |
| The quantity of what the sample constitutes | 300CY | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Manuel | Last name of sampler or witnessed by | Uy |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Atkinson Portable Plant - Lancaster | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0026 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Conveyor Belt | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-12-03-22
DIME Test ID: 2025-12-03-22-5
Testing Lab: Kleinfelder, Incorporated - Los Angeles
Test Method: CTM 217-June 2011: Method of Test for Sand Equivalent
Test Release Date: 2025-12-04
Test Results
Number of tests: 3
Input Type: Calculated
Tester's full name: Manuel Uy
Date of test: 12/04/2025
Temperature correction: 0
Temperature of solution: 74
Clay reading (test 1): 4.9
Sand reading (test 1): 4.4
Clay reading (test 2): 5.1
Sand reading (test 2): 4.4
Clay reading (test 3): 4.9
Sand reading (test 3): 4.2
Sand equivalent (test 1): 90
Sand equivalent (test 2): 87
Sand equivalent (test 3): 86
Sand equivalent before temperature correction: 88
Sand equivalent after temperature correction: 88
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/4/2025 ✔