Summary for Test 2025-09-23-90-3
Test performed: CTM 375-February 2012Project Information
| Project Identifiers | Project ID: 1001055 DEA: 112N1684 EFIS: 1122000281 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5-R53.9/R63.7 |
| Award Date | 05/02/2025 |
| Closeout Date | Not set |
| Work Description | POLYESTER CONCRETE, METHACRYLATE, JOINT SEALS AND APPROACH SLABS. |
| Location Description | SAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM ROUTE 5/76 SEPARATION TO AGRA OVERHEAD |
| QA Service Level | 1 (Verified on 06/03/2025) |
Sample Information
| Sample Taken Date | 09/23/2025 | Sample Unique Key | 90 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/26/2025 |
| Sample type | Quality Assurance | A brief description of the sample | Normal Production |
| The quantity of what the sample constitutes | 2 boxes | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Mohammed | Last name of sampler or witnessed by | Masud |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 25-09-23-90-A | Linked DIME Sample ID | 2025-09-23-91 |
| The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | 320200 Otay Val | |
| Binder content (%) | 4.9 | Virgin binder PG | PG58-16 |
| Design binder PG | PG 64-16 | Binder Supplier | Valero |
| RAP content (%) | 22 | WMA Additives | No |
| Antistrip type | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-09-23-90
DIME Test ID: 2025-09-23-90-3
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)
Test Release Date: 2025-12-09
Test Results
Number of Cores: 2
Input Type: Measured
Tester's full name: Mohammad Abbassi
Date of test: 12/05/2025
Core 1 ID: 1 A 2
Dry Weight 1: 921.1 grams
Parrafin Coated Weight 1: 934.8 grams
Coated Weight in Water 1: 519.2 grams
Theoretical Maximum Density: 2.510
Core 2 ID: 1 B 2
Dry Weight 2: 1199.0 grams
Parrafin Coated Weight 2: 1214.1 grams
Coated Weight in Water 2: 677.3 grams
Core 1 Density: 2.301
Core 1 Relative Compaction: 91.7 %
Core 2 Density: 2.306
Core 2 Relative Compaction: 91.9 %
Sublot Relative Compaction: 91.8 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/9/2025 ✔