Summary for Test 2025-04-01-44-5
Test performed: AASHTO T104-99r16Project Information
| Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 04/01/2025 | Sample Unique Key | 44 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/01/2025 |
| Sample type | Aggregate Prequalification Program | A brief description of the sample | 3/8 AGG NATURAL |
| The quantity of what the sample constitutes | 10 Bags Of Aggregate | From where was the sample collected | Source |
| First name of sampler or witnessed by | MIGUEL | Last name of sampler or witnessed by | MONTELONGO |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Granite Bradshaw | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-34-0060 / 91-34-0048 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile @ Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-04-01-44
DIME Test ID: 2025-04-01-44-5
Testing Lab: Granite Construction Company - Sacramento
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2025-12-02
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Coarse and Fine Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Freshly prepared
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: MIGUEL MONTELONGO
Date of test: 04/01/2025
Percentage of 2 ½ x 1 ½ material loss: 0 %
Percentage of 1 ½ x ¾ inch material loss: 0 %
Percentage of ¾ x ⅜ inch material loss: 2.1 %
Percentage of ⅜ inch x No. 4 material loss: 1.2 %
Percentage of No. 4 x 8 material loss: 4.6 %
Percentage of No. 8 x 16 material loss: 2.3 %
Percentage of No. 16 x 30 material loss: 0 %
Percentage of No. 30 x 50 material loss: 0 %
Coarse weighted average loss: 1.2 %
Fine weighted average loss: 3.7 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/2/2025 ✔