Summary for Test 2017-12-22-12-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 99999 DEA: 0322222 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| QA Service Level | (Verified on 04/05/2013) |
Sample Information
| Sample Taken Date | 12/22/2017 | Sample Unique Key | 12 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/22/2017 |
| Sample type | Verification | A brief description of the sample | 3 4 in Aggregate Sample |
| The quantity of what the sample constitutes | Unknown Quantity | From where was the sample collected | Source |
| First name of sampler or witnessed by | Aggregate First Name | Last name of sampler or witnessed by | Aggregate Last Name |
| Title of sampler | Aggregate Engineer | Telephone number of sampler | 7753550420 |
| Laboratory sample identification | Aggregate Sample ID | Linked DIME Sample ID | Aggregate DIME Sample ID |
| The fabricator/manufacturer/facility name | SNC Mustang Pit Sparks NV | Transportation Laboratory (TL) Number | Aggregate TL Number |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Aggregate TL Form | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Aggregate Source ID |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | SNC Mustang Pit Sparks NV | The fabricator/manufacturer designation for the sample | SNC Mustang Pit Sparks NV |
| The plant number | 99999 | A detailed description of where the material sample was collected | Coarse aggregate pile at source |
| Where the material sample would have been placed if not sampled | 7753550420 | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
| HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-12-22-12
DIME Test ID: 2017-12-22-12-1
Testing Lab: CT HQ - QAM Sacramento Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2017-12-29
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Clinton Edmiston
Date of test: 12/22/2017
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 94.5 %
Cumulative percent passing the 1/2 in. sieve: 81.3 %
Cumulative percent passing the 3/8 in. sieve: 69.5 %
Cumulative percent passing the 1/4 in. sieve: 69.5 %
Cumulative percent passing the #4 sieve: 44.3 %
Cumulative percent passing the #8 sieve: 30.3 %
Cumulative percent passing the #16 sieve: 21.6 %
Cumulative percent passing the #30 sieve: 15.6 %
Cumulative percent passing the #50 sieve: 10 %
Cumulative percent passing the #100 sieve: 6 %
Cumulative percent passing the #200 sieve: 4.03 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/22/2017 ✔