Summary for Test 2025-11-21-17-5
Test performed: ASTM C88-5
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
| Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 11/21/2025 | Sample Unique Key | 17 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/21/2025 |
| Sample type | Aggregate Prequalification Program | A brief description of the sample | #4CRUSHERFINES |
| The quantity of what the sample constitutes | 10 Bags Of Aggregate | From where was the sample collected | Source |
| First name of sampler or witnessed by | MIGUEL | Last name of sampler or witnessed by | MONTELONGO |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Granite Bradshaw | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-34-0060 / 91-34-0048 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile at the Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | fine | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-11-21-17
DIME Test ID: 2025-11-21-17-5
Testing Lab: Granite Construction Company - Sacramento
Test Method: ASTM C88-5: Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
Test Release Date: 2025-12-02
Test Results
What size aggregate is being tested?: Fine Aggregate
Input Type: Calculated
Tester's full name: MIGUEL MONTELONGO
Date of test: 11/21/2025
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Freshly prepared
Mass of sample retained on the #4 sieve (before immersion): 0 grams
Mass of sample retained on the #8 sieve (before immersion): 100.7 grams
Mass of sample retained on the #16 sieve (before immersion): 100.4 grams
Mass of sample retained on the #30 sieve (before immersion): 100.1 grams
Mass of sample retained on the #50 sieve (before immersion): 100.4 grams
Percent loss from sample retained on the No. 4 x 8 sieve (fine): 3 %
Percent loss from sample retained on the No. 8 x 16 sieve: 3 %
Percent loss from sample retained on the No. 16 x 30 sieve: 3 %
Percent loss from sample retained on the No. 30 x 50 sieve: 1 %
Percent loss from sample retained on the #50 sieve: 0 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/2/2025 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.