Summary for Test 2025-11-03-73-3

Test performed: AASHTO T315-24

Project Information

Project IdentifiersProject ID: 1000563
DEA: 021H7104
EFIS: 0217000013
DIST-CO-RTE-PM02-SIS-3,5-L47.4,R45.5/R46.0
Award Date11/13/2024
Closeout DateNot set
Work DescriptionNEW MECHANIC SHOP AT YREKA MAINTENANCE STATION.
Location DescriptionSISKIYOU COUNTY IN YREKA ON ROUTE 3 AT YREKA MAINTENANCE STATION AND ON ROUTE 5 FROM 0.2 MILE SOUTH TO 0.4 MILE NORTH OF SOUTH YREKA UNDERCROSSING #02-0159
QA Service Level1 (Verified on 09/24/2024)

Sample Information

Sample Taken Date11/03/2025 Sample Unique Key73
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing11/12/2025
Sample typeQuality Assurance A brief description of the sample58-34m
The quantity of what the sample constitutes1 can of binder From where was the sample collectedSource
First name of sampler or witnessed byg Last name of sampler or witnessed byg
Title of samplertester Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameValero Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form877607 Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type Asphalt Binder Mix Number

Test Details

DIME Sample ID: 2025-11-03-73
DIME Test ID: 2025-11-03-73-3
Testing Lab: Atlas - Denver
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2025-12-02

Test Results


Phase: PAV residue
Input Type: Measured
Tester's full name: Erik Svensson
Date of test: 11/26/2025
Test Plate Diameter: 8 mm
Test Gap: 2 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 1.01 %
Stress Amplitude: 27.965 kPa
Phase Angle (δ) (for the 10 cycles): 39.1 degree
Complex Modulus (G*) (for the 10 measurements): 2782.465 kPa
Test Temperature (Specimen 1): 16.0 C
(G*) x sin(δ)=: 1755 kPa
General comments (publicly viewable) (Max 1000 characters): PAV

Test was verified on 12/2/2025