Summary for Test 2025-07-26-16-6
Test performed: CTM 521-June 2020Project Information
| Project Identifiers | Project ID: 995254 DEA: 040P9204 EFIS: 0418000026 |
|---|---|
| DIST-CO-RTE-PM | 04-ALA-680-6.4/6.6 |
| Award Date | 12/20/2024 |
| Closeout Date | Not set |
| Work Description | HMA AND RHMA SURFACING, DECK REPAIR, POLYESTER OVERLAY AND JOIN SEALS |
| Location Description | ALAMEDA COUNTY IN FREMONT FROM 0.1 MILE SOUTH OF MISSION SAN JOSE 680/238 SEPARATION TO 0.3 MILE NORTH OF MISSION SAN JOSE 680/238 SEPARATION |
| QA Service Level | 1 (Verified on 10/17/2023) |
Sample Information
| Sample Taken Date | 07/26/2025 | Sample Unique Key | 16 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/27/2025 |
| Sample type | Quality Control | A brief description of the sample | 4x8 Concrete Cylinders |
| The quantity of what the sample constitutes | 9 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Brent | Last name of sampler or witnessed by | Van-Y |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Mix 675CTSRSC Set 2 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Myers and Sons Construction | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 675CTSRSC |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | Load 13 | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | Mix 675CTSRSC Set 2 | |
| A detailed description of where the material sample was collected | S/B RTE 680, Mission Bvld Overpass, Lane 1-4 | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-07-26-16
DIME Test ID: 2025-07-26-16-6
Testing Lab: G3 Quality, Incorporated - Cerritos
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Test Release Date: 2025-11-21
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Travis Van-Y
Date of test: 08/24/2025
Capped in accordance with?: ASTM C1231 - Unbonded Elastomeric Pad Cap
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 56430 lb
Maximum load on cylinder 2: 57770 lb
Maximum load on cylinder 3: 57500 lb
Type of fracture pattern of cylinder 1: 3
Type of fracture pattern of cylinder 2: 2
Type of fracture pattern of cylinder 3: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Correction factor for cylinder 3: 1.00
Age of specimen: 28 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 12.57 in^2
Cross sectional area of cylinder 2: 12.57 in^2
Cross sectional area of cylinder 3: 12.57 in^2
Compressive strength (to nearest 10 psi): 4560 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/21/2025 ✔