DIME - Test Summary

DIME » All Projects » Project DEA: 020J0104 » Sample 2025-06-26-123 » View Test Details

Summary for Test 2025-06-26-123-6

Test performed: CTM 389-19

Project Information

Project Identifiers	Project ID: 1000117 DEA: 020J0104 EFIS: 0219000044
DIST-CO-RTE-PM	02-TEH-99-4.2/4.8
Award Date	07/11/2024
Closeout Date	Not set
Work Description	PLACE HMA, CCTV TOWER AND INSTALL LIGHTING SYSTEM.
Location Description	TEHAMA COUNTY ABOUT 7.0 MILES SOUTH OF LOS MOLINOS FROM 0.3 MILE SOUTH OF SOUTH AVENUE TO 0.6 MILE SOUTH OF VINA ROAD
QA Service Level	1 (Verified on 03/18/2024)

Sample Information

Sample Taken Date	06/26/2025	Sample Unique Key	123
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/26/2025
Sample type	Production Start-Up	A brief description of the sample	16 boxes of Lime Treated 3/4-inch Type A HMA (PG 70-10)
The quantity of what the sample constitutes	Production Start-Up Evaluation	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Brandon	Last name of sampler or witnessed by	White
Title of sampler		Telephone number of sampler
Laboratory sample identification	D79924	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Knife River — Orland Plant (Orland, CA)	Transportation Laboratory (TL) Number	858138
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	3907716

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	3/4 inch	Lot number
Sublot number		HMA Mix Number	JMF3513202517
Binder content (%)	4.5	Virgin binder PG	PG 70-10
Design binder PG	PG 70-10	Binder Supplier	Pacific Northwest (Stockton, CA)
RAP content (%)	15	WMA Additives	No
Antistrip type	Lime

Test Details

DIME Sample ID: 2025-06-26-123

DIME Test ID: 2025-06-26-123-6

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt

Test Release Date: 2025-11-20

Test Results

Specified number of passes at 12.7 mm: 15000

Specimen Preparation Method: PMLC

Input Type: Measured

Tester's full name: Dennis Hickey

Date of test: 07/08/2025

Test Temperature: 122 F

Compaction Method: SGC Cylindrical Specimen

Air Void Content for specimen A-1: 7.3 %

Air Void Content for specimen A-2: 7.0 %

Air Void Content for specimen B-1: 6.9 %

Air Void Content for specimen B-2: 6.8 %

Stripping Inflection Point (Wheel A): >15000

Stripping Inflection Point (Wheel B): >15000

Maximum impression at 5000 passes (left wheel): 1.06 mm

Maximum impression at 5000 passes (right wheel): 1.29 mm

Average impression at 5000 passes (left/right avg): 1.18 mm

Maximum impression at 10000 passes (left wheel): 1.22 mm

Maximum impression at 10000 passes (right wheel): 1.51 mm

Average impression at 10000 passes (left/right avg): 1.37 mm

Maximum impression at 15000 passes (left wheel): 1.38 mm

Maximum impression at 15000 passes (right wheel): 1.74 mm

Average impression at 15000 passes (left/right avg): 1.56 mm

Maximum impression at 20000 passes (left wheel): no data

Maximum impression at 20000 passes (right wheel): no data

Average impression at 20000 passes (left/right avg): no data

Maximum impression at 25000 passes (left wheel): no data

Maximum impression at 25000 passes (right wheel): no data

Average impression at 25000 passes (left/right avg): no data

Raw Data: no data

General comments (publicly viewable) (Max 1000 characters): Nf>15000, SIP>15000, Rut=0.1in.@N15000

Test File Attachments

File Name	Extension	File Size	Date Uploaded	Test ID	Actions
D79924, 858138, 02-0J0103, HWT	pdf	836.57 KB	11/20/2025	2025-06-26-123-6	Info

Test was verified on 11/20/2025 ✔