Summary for Test 2025-09-25-95-1
Test performed: AASHTO T308-25Project Information
| Project Identifiers | Project ID: 1001605 DEA: 114B0044 EFIS: 1122000173 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5-54-9.5,0.0/6.4 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Construct Middle Mile Broadband Network. |
| Location Description | IN SAN DIEGO COUNTY IN AND NEAR SAN DIEGO, NATIONAL CITY, AND CHULA VISTA ON ROUTE 5 AT 0.1 MILE NORTH OF SWEETWATER RIVER BRIDGE AND ON ROUTE 54 FROM ROUTE 5/54 SEPARATION TO 0.4 MILE EAST OF SWEETWATER ROAD UNDERCROSSING |
| QA Service Level | 1 (Verified on 09/18/2025) |
Sample Information
| Sample Taken Date | 09/25/2025 | Sample Unique Key | 95 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/26/2025 | Sample type | Quality Assurance |
| A brief description of the sample | Normal Production | The quantity of what the sample constitutes | 2 boxes |
| From where was the sample collected | Supplier | First name of sampler or witnessed by | Mohammed |
| Last name of sampler or witnessed by | Masud | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vulcan Otay | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | 320200 Otay Val | |
| Binder content (%) | 4.9 | Virgin binder PG | PG58-16 |
| Design binder PG | PG 64-16 | Binder Supplier | Valero |
| RAP content (%) | 22 | WMA Additives | No |
| Antistrip type | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-09-25-95
DIME Test ID: 2025-09-25-95-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2025-12-02
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Shawn Rivers
Date of test: 11/18/2025
Test procedure used?: Method A
Mass of the specimen basket assembly: 4026.0 g
Mass of the specimen and specimen basket assembly prior to ignition: 5551.6 g
Mass of HMA Sample prior to ignition: 1525.6 g
Mass Loss: 89.9 g
Mass of aggregate remaining after ignition: 1435.7 g
Correction Factor (Percent by mass of HMA Specimen): 0.59 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.00 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 5.30 %
General comments (publicly viewable) (Max 1000 characters): Complies
Test was verified on 12/2/2025 ✔