Summary for Test 2025-10-24-38-4
Test performed: CTM 217-June 2011Project Information
| Project Identifiers | Project ID: 210160 DEA: 101E2204 EFIS: 1015000011 COOP: 10439 |
|---|---|
| DIST-CO-RTE-PM | 10-SJ-580-13.3/13.8 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Widen existing road under I-580 to accommodate ramp widening and additional left turn lanes . Proposes to replace existing two lane bridge over the adjacent California Aqueduct on the east side of the Interchange and add two additional lanes |
| Location Description | Between I-580 and Old Schulte Road |
| QA Service Level | 2 (Verified on 01/30/2015) |
Sample Information
| Sample Taken Date | 10/24/2025 | Sample Unique Key | 38 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/25/2025 |
| Sample type | Quality Control | A brief description of the sample | 1'xno.4 |
| The quantity of what the sample constitutes | 2 bags | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Derrick | Last name of sampler or witnessed by | Wofford |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Cemex Tracy | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Teichert Vernalis 1003/1104 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile @ Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-10-24-38
DIME Test ID: 2025-10-24-38-4
Testing Lab: Construction Testing Services
Test Method: CTM 217-June 2011: Method of Test for Sand Equivalent
Test Release Date: 2025-11-14
Test Results
Number of tests: 3
Input Type: Calculated
Tester's full name: Michael Mahurin
Date of test: 10/24/2025
Temperature correction: 0
Temperature of solution: 72
Clay reading (test 1): 4.4
Sand reading (test 1): 3.5
Clay reading (test 2): 4.6
Sand reading (test 2): 3.8
Clay reading (test 3): 4.7
Sand reading (test 3): 3.8
Sand equivalent (test 1): 80
Sand equivalent (test 2): 83
Sand equivalent (test 3): 81
Sand equivalent before temperature correction: 82
Sand equivalent after temperature correction: 82
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/14/2025 ✔