Summary for Test 2025-09-16-104-1

Test performed: AASHTO T315-24

Project Information

Project IdentifiersProject ID: 1001063
DEA: 033G3804
EFIS: 0324000122
DIST-CO-RTE-PM03-BUT-32-R23.9/30.8,31.0/31.6
Award Date05/27/2025
Closeout Date08/26/2026
Work DescriptionHMA OVERLAY, COLD PLANE, AND REMOVE & REPLACE PVMT DELINEATION.
Location DescriptionBUTTE COUNTY NEAR CHICO FROM NOPEL AVENUE TO 1.3 MILES WEST OF CARPENTER RIDGE ROAD AND FROM 1.1 MILES WEST OF CARPENTER RIDGE ROAD TO 0.5 MILE WEST OF CARPENTER RIDGE ROAD
QA Service Level1 (Verified on 03/19/2025)

Sample Information

Sample Taken Date09/16/2025 Sample Unique Key104
Date that the sample was received by the laboratory/organization performing the testing11/10/2025 Sample typeQuality Assurance
A brief description of the sample1/2 HMA SP w/25%Rap The quantity of what the sample constitutes1 can
From where was the sample collectedSource First name of sampler or witnessed byMark
Last name of sampler or witnessed byAtteberry Title of samplerTET
Telephone number of sampler Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameTeichert Hallwood
Transportation Laboratory (TL) Number Inspector Lot Number from the Transportation Laboratory (TL) Form955760
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 58-22
ModifiedNo Lot number2
Sublot number5 Tank number
Time of sample HMA SupplierTeichert Hallwood
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeYes
Multigrade TypePG 58-22 / PG 58-16 Asphalt Binder Mix Number
HMA TypeNot set HMA Supplier Mix ID NumberNot set

Test Details

DIME Sample ID: 2025-09-16-104
DIME Test ID: 2025-09-16-104-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2025-11-13

Test Results


Phase: Original binder
Input Type: Measured
Tester's full name: Amare Tefera
Date of test: 11/12/2025
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.06 %
Stress Amplitude: 0.175 kPa
Phase Angle (δ) (for the 10 cycles): 87.3 degree
Complex Modulus (G*) (for the 10 measurements): 1.450 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 1.45 kPa
General comments (publicly viewable) (Max 1000 characters): Original

Test was verified on 11/13/2025 ✔