Summary for Test 2025-10-06-55-1
Test performed: AASHTO T315-24Project Information
| Project Identifiers | Project ID: 1000958 DEA: 021K0704 EFIS: 0224000048 |
|---|---|
| DIST-CO-RTE-PM | 02-LAS-139-11.0/16.0 |
| Award Date | 04/09/2025 |
| Closeout Date | Not set |
| Work Description | PERFORM PARTIAL DEPTH RECYCLING AND PLACE HOT MIX ASPHALT (TYPE A). |
| Location Description | LASSEN COUNTY ABOUT 9 MILES NORTH OF SUSANVILLE FROM 1.2 MILES SOUTH OF HAGATA ROAD TO 0.9 MILE SOUTH OF MEADOW CHANNEL BRIDGE |
| QA Service Level | 1 (Verified on 03/21/2025) |
Sample Information
| Sample Taken Date | 10/06/2025 | Sample Unique Key | 55 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/15/2025 |
| Sample type | Quality Assurance | A brief description of the sample | Binder PG 58-34 Non-Modified |
| The quantity of what the sample constitutes | 2 cans, split sample | From where was the sample collected | Source |
| First name of sampler or witnessed by | J | Last name of sampler or witnessed by | Delgado |
| Title of sampler | Consultant | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Hat Creek - Shaw Pit Facility | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | 876958 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-34 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | Hat Creek - Shaw Pit Facility | |
| Certified Asphalt Supplier | Albina Asphalt (Klamath Falls Plant) - Klamath Falls OR | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-10-06-55
DIME Test ID: 2025-10-06-55-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2025-10-27
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 10/27/2025
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.06 %
Stress Amplitude: 0.195 kPa
Phase Angle (δ) (for the 10 cycles): 82.3 degree
Complex Modulus (G*) (for the 10 measurements): 1.618 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 1.63 kPa
General comments (publicly viewable) (Max 1000 characters): OG
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 2025-10-06-55 | 252.79 KB | 10/27/2025 | 2025-10-06-55-1 | Info |
Test was verified on 10/27/2025 ✔