Summary for Test 2025-10-01-67-3
Test performed: CTM 389-19Project Information
| Project Identifiers | Project ID: 1001120 DEA: 033G6204 EFIS: 0325000037 |
|---|---|
| DIST-CO-RTE-PM | 03-YOL-5-R22.8/R28.9 |
| Award Date | 06/03/2025 |
| Closeout Date | Not set |
| Work Description | COLD PLANE AC PVMT AND HMA (TYPE A). |
| Location Description | YOLO COUNTY NEAR DUNNIGAN FROM 0.2 MILE NORTH OF ROUTE 505/5 SEPARATION TO THE COLUSA COUNTY LINE |
| QA Service Level | 1 (Verified on 04/02/2025) |
Sample Information
| Sample Taken Date | 10/01/2025 | Sample Unique Key | 67 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/14/2025 |
| Sample type | Production Start-Up | A brief description of the sample | 3/4" HMA w/ 15% RAP |
| The quantity of what the sample constitutes | 10 Boxes | From where was the sample collected | Source |
| First name of sampler or witnessed by | Dustan | Last name of sampler or witnessed by | Kliethermes |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | PSU 25-215 | Linked DIME Sample ID | 2025-10-01-56 |
| The fabricator/manufacturer/facility name | Teichert Woodland | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 1 | HMA Mix Number | 30640432407P |
| Binder content (%) | 4.7 | Virgin binder PG | |
| Design binder PG | PG 64-16 | Binder Supplier | PNW |
| RAP content (%) | 15 | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-10-01-67
DIME Test ID: 2025-10-01-67-3
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2025-10-23
Test Results
Specified number of passes at 12.7 mm: 25000
Specimen Preparation Method: PMLC
Input Type: Measured
Tester's full name: Joshua Wilson
Date of test: 10/21/2025
Test Temperature: 122 F
Compaction Method: SGC Cylindrical Specimen
Air Void Content for specimen A-1: 6.9 %
Air Void Content for specimen A-2: 6.7 %
Air Void Content for specimen B-1: 6.5 %
Air Void Content for specimen B-2: 6.7 %
Stripping Inflection Point (Wheel A): 25000
Stripping Inflection Point (Wheel B): 25000
Maximum impression at 5000 passes (left wheel): 2.38 mm
Maximum impression at 5000 passes (right wheel): 1.68 mm
Average impression at 5000 passes (left/right avg): 2.03 mm
Maximum impression at 10000 passes (left wheel): 2.98 mm
Maximum impression at 10000 passes (right wheel): 1.99 mm
Average impression at 10000 passes (left/right avg): 2.48 mm
Maximum impression at 15000 passes (left wheel): 3.38 mm
Maximum impression at 15000 passes (right wheel): 2.2 mm
Average impression at 15000 passes (left/right avg): 2.79 mm
Maximum impression at 20000 passes (left wheel): 3.69 mm
Maximum impression at 20000 passes (right wheel): 2.39 mm
Average impression at 20000 passes (left/right avg): 3.04 mm
Maximum impression at 25000 passes (left wheel): 4.03 mm
Maximum impression at 25000 passes (right wheel): 2.46 mm
Average impression at 25000 passes (left/right avg): 3.25 mm
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/23/2025 ✔