Summary for Test 2025-10-07-38-1
Test performed: AASHTO T335-09r13Project Information
| Project Identifiers | Project ID: 1001059 DEA: 112N2334 EFIS: 1124000191 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5,15-Var |
| Award Date | 05/22/2025 |
| Closeout Date | Not set |
| Work Description | MICROSURFACING, COLD PLANE, HMA TYPE A, SIGN INSTALLATION & STRIPING. |
| Location Description | SAN DIEGO COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 05/30/2025) |
Sample Information
| Sample Taken Date | 10/07/2025 | Sample Unique Key | 38 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/10/2025 |
| Sample type | Per Request | A brief description of the sample | Micro-surfacing |
| The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Fahad | Last name of sampler or witnessed by | Masud |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 25-10-07-38-S | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Pavement Coatings | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Not Provided |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Job Site | |
| Where the material sample would have been placed if not sampled | Rte. 5,15 / VAR | Primary Aggregate Nominal Size | 3/8 inch |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-10-07-38
DIME Test ID: 2025-10-07-38-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Test Release Date: 2025-11-05
Test Results
Method: 1 - Combined Fracture Determination
Aggregate Size and Fracture Type: Coarse 2 Faced and Fine 1 Faced
Input Type: Measured
Tester's full name: Shawn Rivers
Date of test: 10/20/2025
Mass of fractured, coarse, 2 faced particles tested: 500 g
Mass of questionable, coarse, 2 faced particles tested: 0 g
Mass of unfractured, coarse, 2 faced particles tested: 0 g
Mass of fractured, fine, 1 faced particles tested: 100 g
Mass of questionable, fine, 1 faced particles tested: 0 g
Mass of unfractured, fine, 1 faced particles tested: 0 g
Percentage of questionable, coarse, 2 faced particles tested: 0 %
Percentage of questionable, fine, 1 faced particles tested: 0 %
Percentage of fractured, coarse, 2 faced particles tested: 100 %
Percentage of fractured, fine, 1 faced particles tested: 100 %
General comments (publicly viewable) (Max 1000 characters): Complies
Test was verified on 11/5/2025 ✔