Summary for Test 2025-09-20-31-2
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 5016 DEA: 080K8004 |
|---|---|
| DIST-CO-RTE-PM | 08-SBd-395-51.9/58.1,61.0/65.6 |
| Award Date | 06/16/2009 |
| Closeout Date | 07/29/2010 |
| Work Description | OVERLAY RUBBERIZED HOT MIX ASPHALT AND DIG OUTS |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 07/29/2010) |
Sample Information
| Sample Taken Date | 09/20/2025 | Sample Unique Key | 31 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/20/2025 |
| Sample type | Quality Assurance | A brief description of the sample | Aggregates |
| The quantity of what the sample constitutes | 2 Bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | IGNACIO | Last name of sampler or witnessed by | ARECHIGA |
| Title of sampler | QC Technician | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Dutra Richmond | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 1 | HMA Mix Number | L240097 |
| Binder content (%) | 5.2 | Virgin binder PG | |
| Design binder PG | Binder Supplier | Valero Benicia | |
| RAP content (%) | 15 | WMA Additives | |
| Antistrip type | WMA AD-Here XL-9000 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-09-20-31
DIME Test ID: 2025-09-20-31-2
Testing Lab: CT D04 - Richmond Field Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2025-10-08
Test Results
What temperature unit is used?: Celsius
Input Type: Calculated
Tester's full name: Jose Leon Amparan
Date of test: 10/07/2025
Test procedure used?: Method A
Mass of HMA Sample prior to ignition: 2104.0 g
Mass Loss: 134.9 g
Correction Factor (Percent by mass of HMA Specimen): 0.00 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.14 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 5.47 %
General comments (publicly viewable) (Max 1000 characters): Sample 2 for correction Factor
Test was verified on 10/8/2025 ✔