Summary for Test 2025-09-23-8-3
Test performed: ASTM A970-18Project Information
| Project Identifiers | Project ID: 1000403 DEA: 120K91U4 EFIS: 1222000031 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-91-R9.2/R11.4 |
| Award Date | 01/03/2025 |
| Closeout Date | Not set |
| Work Description | CONST BRIDGES, RW, SW, PAVEMENT, DRAINAGE AND ELECTRICAL SYSTEMS. |
| Location Description | ORANGE COUNTY IN ANAHEIM FROM 0.9 MILE WEST TO 1.3 MILES EAST OF LAKEVIEW AVENUE OVERCROSSING |
| QA Service Level | 1 (Verified on 08/19/2024) |
Sample Information
| Sample Taken Date | 09/23/2025 | Sample Unique Key | 8 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 09/29/2025 |
| Sample type | Quality Assurance | A brief description of the sample | HRC 555 Heads & HRC 510 Bars |
| The quantity of what the sample constitutes | 648 pieces | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Quetzal | Last name of sampler or witnessed by | Cornejo Molina |
| Title of sampler | AMR | Telephone number of sampler | (510) 867-6015 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | CMC San Bernardino | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | 55-1143 | |
| Structure name | Lakeview Ave OC | Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Headed Bars | Production or Authorization Testing | Authorization Testing |
|---|---|---|---|
| Rebar Heat Number(s) | 4149386 | Head Manufacturer Lot Number(s) | 1 to 5 |
| Rebar Size | #6 | Headed Bar Model Name | HRC 555 |
| Size of Head | Reduced Size - 4x | Head Connection Type | Forged |
| Head Shape | Circular | Rebar Manufacturer | CMC HRC |
| Head Manufacturer | HRC | Head Fabricator | CMC HRC |
| Material Standard Code | ASTM A706 | Headed Bar Unique ID | 4FG-17-01 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-09-23-8
DIME Test ID: 2025-09-23-8-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A970-18: Standard Specification for Headed Steel Bars for Concrete Reinforcement (Tensile)
Test Release Date: 2025-10-08
Test Results
Number of Headed Bar Samples: 8
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 10/08/2025
UTM: NA
Temperature: 0 f
| Num | Lot # | Area (sqin) | Peak Load (lbf) | Tensile Strength (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|
| 1 | 1 | 0.44 | 41700 | 95000 | Ok Necking | Kleinfelder |
| 2 | 1 | 0.44 | 41290 | 94000 | Broke at Head | Kleinfelder |
| 3 | 1 | 0.44 | 42090 | 95500 | Ok Necking | Kleinfelder |
| 4 | 1 | 0.44 | 41560 | 94500 | Ok Necking | Kleinfelder |
| 5 | 4 | 0.44 | 41400 | 94000 | Ok Necking | Kleinfelder |
| 6 | 4 | 0.44 | 42420 | 96500 | Ok Necking | Kleinfelder |
| 7 | 4 | 0.44 | 42080 | 95500 | Ok Necking | Kleinfelder |
| 8 | 4 | 0.44 | 41200 | 93500 | Ok Necking | Kleinfelder |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/8/2025 ✔