Summary for Test 2025-09-18-57-3
Test performed: AASHTO T59-22Project Information
| Project Identifiers | Project ID: 1000994 DEA: 070Y1804 EFIS: 0724000139 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-60-0.0/R3.3 |
| Award Date | 04/28/2025 |
| Closeout Date | Not set |
| Work Description | REPLACE ASPHALT CONCRETE SURFACING AND SLURRY SEAL. |
| Location Description | LOS ANGELES COUNTY AT VARIOUS LOCATIONS FROM JUNCTION ROUTE 10 TO ROUTE 60/710 SEPARATION |
| QA Service Level | 1 (Verified on 07/09/2025) |
Sample Information
| Sample Taken Date | 09/18/2025 | Sample Unique Key | 57 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/19/2025 |
| Sample type | Verification | A brief description of the sample | EMULSION |
| The quantity of what the sample constitutes | 2qt, one container | From where was the sample collected | Source |
| First name of sampler or witnessed by | Ricardo | Last name of sampler or witnessed by | Richard QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Substanable Emuision | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphaltic Emulsion | Emulsion Grade | QS-1h |
|---|---|---|---|
| Lot Number | Not set | Sub Lot | Not set |
| Dilution Percentage Rate | N/A |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-09-18-57
DIME Test ID: 2025-09-18-57-3
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Storage Stability of Emulsified (Sec. 18))
Test Release Date: 2025-09-29
Test Results
Input Type: Calculated
Tester's full name: Hussaya Leelakitrungruang
Date of test: 09/23/2025
Mass of beaker, rod, screen (if used) and top portion residue: 460.4 g
Tare mass of the beaker, rod, and screen (if used for top portion): 428.0 g
Mass of beaker, rod, screen (if used for bottom portion) and bottom portion residue: 463.5 g
Tare mass of the beaker, rod, and screen (if used): 430.8 g
Percent residue from the bottom portion of the sample: 65.4 %
Percent residue from the top portion of the sample: 64.88 %
Storage stability: 0.6 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/29/2025 ✔