Summary for Test 2025-09-11-34-1
Test performed: ASTM C136-19Project Information
| Project Identifiers | Project ID: 1001028 DEA: 07317804 EFIS: 0715000274 COOP: 075065 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-34-6.3 |
| Award Date | 10/29/2024 |
| Closeout Date | Not set |
| Work Description | Construct grade separation structure and connector ramps |
| Location Description | SR34 and Rice Avenue, Oxnard |
| QA Service Level | 2 (Verified on 02/25/2025) |
Sample Information
| Sample Taken Date | 09/11/2025 | Sample Unique Key | 34 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/11/2025 |
| Sample type | Quality Control | A brief description of the sample | 1 Bucket of 1/2", 1 Bucket of 3/8", & 1 Bucket of Sand |
| The quantity of what the sample constitutes | 1 Bucket of 1/2", 1 Bucket of 3/8", 1 Bucket of Sand | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Benjamin | Last name of sampler or witnessed by | Aragon |
| Title of sampler | QC Inspector | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Con-Fab California, LLC - Shafter | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Rice Avenue OH | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Con-Fab California, LLC Shafter |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile @ Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | SCC-S8.5-0FG | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-09-11-34
DIME Test ID: 2025-09-11-34-1
Testing Lab: Con-Fab California, LLC
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2025-09-24
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Has the fine aggregate sample been reduced? (question for combined gradation type): Yes
Input Type: Calculated
Tester's full name: Benjamin Aragon
Date of test: 09/11/2025
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 95 %
Cumulative percent passing the 3/8 in. sieve: 74.7 %
Cumulative percent passing the #4 sieve: 51.8 %
Cumulative percent passing the #8 sieve: 43.8 %
Cumulative percent passing the #16 sieve: 35.3 %
Cumulative percent passing the #30 sieve: 22.6 %
Cumulative percent passing the #50 sieve: 8 %
Cumulative percent passing the #100 sieve: 2.8 %
Cumulative percent passing the #200 sieve: 0.1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/24/2025 ✔