DIME - Test Summary

Summary for Test 2025-03-20-26-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 995449 DEA: 07349504 EFIS: 0718000161
DIST-CO-RTE-PM	07-LA-2,5,101,170-Var
Award Date	02/29/2024
Closeout Date	Not set
Work Description	INSTALL NEW TRANSPORTATION MANAGEMENT SYSTEM ELEMENTS.
Location Description	LOS ANGELES COUNTY IN LOS ANGELES FROM ROUTE 134/170 SEPARATION TO ROUTE 170/5 SEPARATION
QA Service Level	1 (Verified on 01/22/2024)

Sample Taken Date	03/20/2025	Sample Unique Key	26
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/24/2025
Sample type	Verification	A brief description of the sample	PSUE 3/4" WMA A SP R25 0.50% EVO
The quantity of what the sample constitutes	3 bags of comb agg., 2 bags of RAP	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Thomas Shiver	Last name of sampler or witnessed by	Vulcan - QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0175A-25	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Ingevity, SJR, Fish Canyon Irwindale, Vulcan Sun Valley	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035, 91-19-0016
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Vulcan Sun Valley Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	220200W SVA SJR	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2025-03-20-26

DIME Test ID: 2025-03-20-26-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2026-04-03

Input Type: Measured

Tester's full name: FO

Date of test: 03/27/2025

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 968.6 grams

Mass of the pycnometer with water (B): 655.9 grams

Mass of the oven dried sample (before pycnometer) (A): 493.6 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 493.6 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.635

Bulk specific gravity (SSD Basis): 2.670

Apparent specific gravity: 2.729

Absorption: 1.3 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 4/3/2026 ✔