DIME - Test Summary

Summary for Test 2025-08-22-48-4

Test performed: CTM 212-May 2010

Project Identifiers	Project ID: 1000279 DEA: 023H70U4 EFIS: 0223000161
DIST-CO-RTE-PM	02-TRI-299-15.0/25.7
Award Date	08/09/2024
Closeout Date	Not set
Work Description	RHMA-G, HMA (TYPE A), COLD PLANE AC, & SOLDIER PILE RETAINING WALL.
Location Description	TRINITY COUNTY NEAR DEL LOMA FROM 1.0 MILE EAST OF TRINITY RIVER BRIDGE NO.05-0006 TO 0.1 MILE WEST OF PRAIRIE CREEK ROAD
QA Service Level	1 (Verified on 04/30/2024)

Sample Taken Date	08/22/2025	Sample Unique Key	48
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/26/2025
Sample type	Acceptance	A brief description of the sample	Shoulder Backing
The quantity of what the sample constitutes	Not Provided	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Miguel	Last name of sampler or witnessed by	Not provided
Title of sampler	Inspector	Telephone number of sampler
Laboratory sample identification	D80019	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Eagle Rock Inc, Junction City	Transportation Laboratory (TL) Number	866073
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-53-0007
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Stockpile
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2025-08-22-48

DIME Test ID: 2025-08-22-48-4

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: CTM 212-May 2010: Method of Test for Unit Weight of Aggregate

Test Release Date: 2025-09-15

Input Type: Measured

Tester's full name: Sean McWithey

Date of test: 09/02/2025

Which procedure was used to fill the measure with aggregate?: no data

Weight of water in the measure: 21.051 lbm

Water temperature: 78 deg F

Tare weight of empty measure: 12.972 lbm

Weight of measure filled with aggregate (test 1): 51.543 lbm

Weight of measure filled with aggregate (test 2): 51.568 lbm

Weight of measure filled with aggregate (test 3): 51.629 lbm

Water density: 62.24 lbf/ft^3

Factor F: 2.96 ft^-3

Net weight of aggregate in measure (test 1): 38.57 lbm

Net weight of aggregate in measure (test 2): 38.6 lbm

Net weight of aggregate in measure (test 3): 38.66 lbm

Average net weight of aggregate required to fill the measure: 38.61 lbm

Aggregate unit weight: 114.15 lbf/ft^3

General comments (publicly viewable) (Max 1000 characters): UW=114.15 lb/cu ft

Test was verified on 9/15/2025 ✔