Summary for Test 2025-07-29-9-7
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 994673 DEA: 033F0704 EFIS: 0312000054 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC-51-2.0/3.5 |
| Award Date | 08/17/2023 |
| Closeout Date | Not set |
| Work Description | American River Bridge Rehabilitation |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 05/15/2023) |
Sample Information
| Sample Taken Date | 07/29/2025 | Sample Unique Key | 9 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/07/2025 | Sample type | Quality Assurance |
| A brief description of the sample | A325 HDG Bolts | The quantity of what the sample constitutes | 545 Bolts |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Jamie |
| Last name of sampler or witnessed by | Doe | Title of sampler | Associate Steel Inspector |
| Telephone number of sampler | (916) 838-4405 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | L&B Metal Product Fabrication | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | S50-035-25 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 10934240 | Nut Mfg. Lot Number(s) | |
| Washer Mfg. Lot Number(s) | Bolt Specification | ASTM A325 | |
| Bolt Length(s) | 2-1/2" | Nut Specification | N/A |
| Washer Specification | N/a | Finish | HDG, ASTM A153/F2329 |
| Diameter/Size | 3/4" | Bolt Mfg. Lot Number | BG3003 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-07-29-9
DIME Test ID: 2025-07-29-9-7
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Test Release Date: 2025-09-15
Test Results
Number of Samples: 3
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 09/12/2025
UTM: NA
Temperature: 72 f
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By |
|---|---|---|---|---|---|---|---|
| 1 | 1A | BG3003 | 0.75 | 51140 | 0 | NA | W Torres |
| 2 | 1B | BG3003 | 0.75 | 46340 | 0 | NA | W Torres |
| 3 | 1C | BG3003 | 0.75 | 47460 | 0 | NA | W Torres |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/15/2025 ✔